Go to Content

Tascam TM2X X-Y Stereo Microphone for DSLR Cameras

TM2X X-Y High-Quality Stereo Microphone for DSLR Cameras with a 50Hz to 20kHz Frequency Response.

 
0.0

(No reviews)

Be the first to

Write a Review

SKU: TTM2XXXXX-P

Print page
You need Flash player 8+ and JavaScript enabled to view this video.
  • Images (5)
  • Video (1)
MSRP: Old Price $159.99 Discounted Price $99.99 Save : $60.00 (38%)
In Stock & Ready To Ship!
MSRP: Old Price $159.99 Discounted Price $99.99 Save : $60.00 (38%)
Add to Cart
The directional condenser microphones equipped on the TM-2X are the same mics used in our highly-regarded DR-series recorders. The X-Y pattern and two mic capsules are ideal for capturing a true representation of the sonic atmosphere, whether it's sound from a wide area or directly in front of the camera. As a result, the TM-2X records pristine sound that fits naturally with the recorded video.

High-Audio Quality
Tascam continues to develop recording devices that focus on the design of the analog circuits behind the mic capsules. As a result, the TM-2X achieves a high-performance rating and a frequency response of 50 Hz to 20 kHz. The TM-2X is also designed with the capacity to handle high sound pressures up to 120 dB SPL to prevent distortion even in loud scenarios.

Stereo Mini Plug Output
Setup is as simple as connecting the cord from the TM-2X to the camera's mic input jack allowing you to add high-quality audio to video. The output can be set to one of two levels to enable compatibility with a variety of cameras.

Floating Structure for Less Handling Noise
The floating support structure underneath the mics absorbs unwanted handling noise and sounds from cameras' mechanics.

Noise Isolation Arm Included
When capturing video using changeable auto-focus lenses, the sounds produced from the lens itself can disrupt and interfere with recordings. In situations where this noise is a problem, you can reduce the interruptions by using the included noise isolation arm. The noise isolation arm physically increases the distance from the noise source to reduce its capture. The structure of the arm, including its length and height, was developed through extensive testing.

Low-Cut Filter
The unit includes an on-board low-cut filter to cut out low-frequency background noise. Depending on the video recording scenario, you can choose to turn this feature on or off (LOW CUT/FLAT).

Furry Windscreen to Reduce Wind Noise
When filming outdoors, even a slight breeze can enter the mic and cause wind noise. This unit comes with a furry windscreen that can physically prevent this noise from occurring. Wind noise can be reduced by simply covering the mic unit with this windscreen.

Features:

  • Directional stereo condenser mic with X-Y configuration
  • Designed to handle high sound pressures up to 120 dB SPL
  • Floating support structure used to reduce handling noise
  • Low-cut filter to eliminate any unwanted low frequencies
  • Two-stage output level adjustment switch to match cameras
  • Vari-angle allows 180º rotation for optimal placement
  • Included shoe adapter (ISO/JIS specification compliant)
  • Tripod mounting threads for most a camera tripods
  • 33cm connection cord
  • Lightweight design (75 g) won't interrupt balance or handling
  • Stereo mini-plug output jack
  • Operates on plug-in power from the connected unit
  • Includes fur windscreen, noise isolation arm, and owner's manual

Get your Tascam TM2X X-Y Stereo Microphone for DSLR Cameras today at the guaranteed lowest price from Sam Ash with our 45-day return and 60-day price protection policy.

Things You Will Get:

  • Stereo X/Y Microphone
  • Fur Windscreen
  • Noise Isolation Arm
  • Owner's Manual

REVIEW SNAPSHOT®

by PowerReviews
Microphone Type Stereo X/Y
Polar Pattern Cardioid
Frequency Response 50Hz-20kHz
Output Impedence 1.6k ohms
Dynamic Range (SPL) 120dB
Pad No
Low Cut Filter No
Body Color Black
Connector Type 3.5mm
Power Requirements None
Weight 2.4 oz
Dimensions 2.24 × 2.3 × 2.7 inches (WxHxD)
Series TM Series
Model TM2

TASCAM TM-2X_Manual.pdf




Warranty Info:

The manufacturer's warranty covers parts for 1 year and labor for 90 days from date of purchase. Heads and disk drives are warrantied for 90 days. The warranty excludes damage from misuse, abuse, and contains other exclusions.

Recommended Accessories