The potential is there! BUT,the stud mounts for the Floyd Rose are way to loose,as if the bolts should be a size bigger,I wound teflon tape several times to tighten the threads.Not sure if they all come this way but mine was a mess,it will no way no how stay in tune the way it was.Another problem with the trem is the plate that holds the springs underneath was installed way to close to one side,I had to redo that as well. The action was terrible intonation way off.So I just started from scratch took the neck off and btw the strap button is screwed in with one of the bolts for the neck a bad idea,I repositioned it so all 4 bolts had the same torcque holding the neck on. I put a very small shim under the neck put it back on, adjusted the truss rod,then set the action and intonation and put an EMG 81 in the bridge position.....After all that I love it! Stays in perfect tune ,has that Gibson mahogany wood sound to it,and plays great! Just be prepared to rebuild it out of the box if you have the same problems I did.