Focusrite ISA 428 MkII Microphone Preamp
Or just $77 per month*0% Interest for 24 Months**
On select purchases $299 or more with your Sam Ash card now thru 12/31/21.
24-equal monthly payments required.Read more
0% Interest for 24 Months
On select purchases $299 or more with your Sam Ash card now thru 12/31/21. 24-equal monthly payments required.
First introduced in 1985, the ISA microphone preamp holds a reputation for outstanding transparency along with subtle warmth contributed by transformer core saturation. The addition of a variable impedance circuit allows ISA users to perfectly match the preamp with any microphone, or to use different settings creatively to shape the sound of the microphone. Unchanged for decades, the ISA microphone preamp topology offers incredible clarity and the signature Focusrite sound that makes it the top choice among many audio professionals today.
- Phantom power available on every channel
- Trim control allows 20dB of extra gain with fine adjustment
- Phase reverse buttons help to correct phase issues with microphones or cables
- Optional A-D converters easily synchronise to external word clock
Four instrument inputs, instantly accessible on the front panel, allow quick and easy connection without the need for a separate DI box. Extra processing can be placed between preamp and conversion via the units dedicated insert points, featured on every channel. Finally, accurate six-segment LED metering is designed to catch even the fastest transients on every channel.
- Four ISA series transformer-based preamps
- ISA series mic preamps have been the producers’ choice on countless hit records over the last two decades.
- Eight-channel optional A-D converter
- Four additional A-D converter inputs allow eight channels of high-quality conversion, with a dynamic range of 122dB and jitter performance below 250 picoseconds.
- Selectable impedance
- Ideal for mic matching or extended microphone creativity. Settings include the ‘Vintage ISA110’ setting, providing the original Focusrite signature sound.
- Four front panel instrument inputs
- Instant access on the front fascia - no separate DI box required.
- Dedicated analogue insert points
- Switchable insert points are featured on every channel, allowing routing (between preamp and output) through additional external processing.
- Variable high-pass Focusrite filter
- Provided on every channel, this is the same filter as featured on the original ISA428.
- Accurate LED meters for every channel
- Clear metering designed to catch even the fastest and most elusive of transients.
- Frequency response at minimum gain (0dB): -0.35dB at 20Hz and –3dB at 122kHz
- Frequency response at maximum gain (60dB): –2.5dB at 20Hz and –3dB 103kHz
- Gain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trim•Maximum headroom: +7.4dBu
- THD+N: 0.0009% (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a 20Hz/22kHz bandpass filter)
- Noise EIN: -126dB (measured at 60dB of gain with 150Ω termination and 20Hz/22kHz bandpass filter)
- Noise at main output with unity gain: -98dBu (measured with a 20Hz/22kHz bandpass filter)
- SNR: 123dB (relative to max output 25dBu)
- SNR: 120dB (relative to 0dBFS (+22dBu)
- CMRR: 88dB.
- Input Impedance, variable: 600Ω, 1400Ω, 2400Ω, 6800Ω
- Frequency Response at unity gain (0dB): -0.3dB at 20Hz and –3dB at 94kHz
- Gain range: -20dB to +10dB in 10dB steps, plus 0dB to +20dB continuously variable trim
- Maximum headroom: +25.4dBu
- THD+N: 0.002% (measured with +4dBu input signal, 0dB gain setting, with a 20Hz/22kHz bandpass filter)
- Noise at main output with unity gain: -91dBu (measured with a 20Hz/22kHz bandpass filter)
- SNR: 116dB (relative to max output 25dBu)
- SNR: 113dB (relative to 0dBFS +22dBu). Input Impedance: 10kΩ
- Frequency Response at +10dB gain: -0.2dB at 20Hz and 0dB at 200kHz
- Frequency Response at +40dB gain: -3dB at 20Hz and –3dB at 38.4kHz
- Gain range: +10dB to +40dB continuously variable
- Maximum headroom: +11.5dBu
- THD+N: 0.006% (measured with –20dBu input signal, at minimum gain (+10dB), with a 20Hz/22kHz bandpass filter)
- Noise at main output with minimum gain (+10dB): -95dBu (measured with a 20Hz/22kHz bandpass filter)
- Input Impedance = >1MΩ
- High Pass Filter
- Roll off = 18dB per octave 3 pole filter
- Frequency range: 16Hz to 420Hz (continuously variable, measured at the 3dB down point)
- 6 LED meter is calibrated 0dBFS = +22dBu (the maximum level which can be correctly converted by the optional internal A/D converter before overload occurs). The meter calibration points are as follows:
- Meter panel calibration value in dBFS / Equivalent dBu value
- 0dBFS / +22dBu
- -2dBFS / +20dBu
- -6dBFS / +16dBu
- -12dBFS / +10dBu
- -18dBFS / +4dBu
- -42dBFS / -20dBu
- Analogue Channel Inputs (Inputs 1-4)
- 4 instrument 1⁄4” TS jack inputs on front panel
- 4 microphone XLR inputs on rear panel
- 4 line 1⁄4” TRS jacks on rear panel
- 4 insert return 1⁄4” TRS jacks on rear panel
- 4 ADC XLR inputs on rear panel
- Analogue Audio Outputs (Outputs 1-4)
- 4 line XLR outputs on rear panel
- 4 insert send 1⁄4” TRS jacks on rear panel
- IEC power input connector 100Vac – 240Vac
- Front Panel Indicators
- 8 output meters, 6 segment
- 4 30-60 mic gain range selection indicator
- 4 +48V phantom power indicator
- 4 Phase indicator
- 4 Insert In indicator
- 4 Filter In indicator
- 4 Input selection indicators (Mic, Line, Inst)
- 4 Z In microphone input impedance selection indicators (Low, ISA110, Med, High) Clock select indicators (44.1, 48, 88.2, 96, 176.4, 192)
- Ext clock indicators (Lock, Word clock, 256X)
- 480mm (W) x 88mm (H) x 280mm (D)
- 19" (W) x 3.5" (H) x 11" (D)
Things You Will Get: