Focusrite AD ISA220 and 430 Expansion Board
Or just $25 per month*0% Interest for 24 Months**
On select purchases $299 or more with your Sam Ash card now thru 12/31/21.
24-equal monthly payments required.Read more
0% Interest for 24 Months
On select purchases $299 or more with your Sam Ash card now thru 12/31/21. 24-equal monthly payments required.
With the addition of the stereo A/D card the ISA 220 and 430 can be used as high quality mono/stereo tracking converters or at mix down as a stereo converter channel for routing complete mixes to digital media.
At the heart of the stereo A/D card is a high quality 24-bit 96 kHz Delta Sigma converter running at 128x oversampling for maximum
conversion performance. Focusrite proprietary designs are used for all
internal clocking and phase lock loop circuits to guarantee the absolute minimum jitter possible, whether free-running or locked to wordclock or Pro Tools Superclock.
When recording to non-24-bit destinations, 16- and 20- bit dithering
can be selected to ensure the highest quality digital conversion for any format. The ISA's optional A/Ds are stereo and allow for input
from internal (post-processing) and external sources simultaneously giving a clean, protected, high-quality path to stereo digital media.
INT (Internal Signal)
The internal input to the A/D is normally fed from the internal channel signal passing through the EQ and dynamics. However, this path can be broken by a signal connected to the rear INT A/D Direct jack, which allows a signal to be directly connected to the A/D input
(replacing the internal processed signal).
EXT (External Input)
An additional external input (XLR on the rear panel) gives the user access to the second channel of conversion on the A/D card for stereo recording with two units or for an additional external source.
Things You Will Get:
|Model Number||ISA 2CH A-D CARD|
|Model||AD ISA220 and 430 Expansion Board|