Go to Content

dbx 2031 Single 31 Band Limiter and Graphic Equalizer


(No reviews)

Be the first to

Write a Review


Print page
You need Flash player 8+ and JavaScript enabled to view this video.
  • Images (1)
MSRP: Old Price $537.00 Discounted Price $430.00 Save : $107.00 (20%)
Order Now! This item is out of stock but will be available soon. You will not be charged until your item ships.

Protect Your Investment! ( More Info )

MSRP: Old Price $537.00 Discounted Price $430.00 Save : $107.00 (20%)
Add to Cart

It's amazing. One little button. So much effect. dbx® Type III® Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. dbx® started out to build the finest EQs possible, boxes with the heritage and performance to rival their famous 30 Series EQs. And to no one's surprise they came out awfully darn good. But then, they got idea of putting their patented noise reduction in the box. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.

Then there's the PeakPlus® Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when they were developing this new series of EQs they wanted something that would be unique to these EQs. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. You'll see, with the 20 Series EQs you get MORE!!!

    •  Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
    •  Type: Electronically balanced/unbalanced, RF filtered
    •  Impedance: Balanced 40k ohm, unbalanced 20k ohm
    •  Max Input Level: >+21dBu balanced or unbalanced
    •  CMRR: >40dB, typically >55dB at 1kHz
    •  Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
    •  Type: Impedance-balanaced/unbalanced, RF filtered
    •  Impedance: Balanced 200 ohm, unbalanced 100 ohm
    •  Max Output Level: >+21dBu balanced/unbalanced into 2k or greater >+18dBm balanced/unbalanced (into 600)
    •  Bandwidth: 20Hz to 20kHz, +/-0.5dB
    •  Frequency Response: <10Hz to >50kHz, +0.5/-3dB
    •  Dynamic Range: 109dB 115dB
    •  Noise Reduction In: (+/-6 and +/-15dB range)
    •  Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
    •  Dynamic Range: >120dB, unweighted
    •  Noise Reduction Out: (+/-6dB range)
    •  Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
    •  Dynamic Range: >120dB, unweighted
    •  Noise Reduction Out: (+/-15dB range)
    •  Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
    •  Dynamic Range: >108dB, unweighted
    •  THD + Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
    •  Noise Reduction: Up to 20dB of dynamic broadband noise reduction
    •  Type III NR: Activates dbx® Type III® Noise Reduction
    •  EQ Bypass: Bypasses the Graphic Equalizer section in the signal path
    •  Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
    •  Range (recessed): Selects either +/- 6dB or +/-15dB slider boost/cut range
    •  Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
    •  Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
    •  Type III® NR Active: Yellow LED
    •  EQ Bypass: Red LED
    •  Clip: Red LED
    •  Low cut Active: Red LED
    •  +/-6dB range: Yellow LED
    •  +/-15dB range: Red LED
    •  Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz; 230VAC 50/60Hz
    •  Power consumption: 12W
    •  Main Connection: IEC receptacle

Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Things You Will Get:

  • Equalizer
  • Power Cable
  • 4 Rack Mount Screws and Washers
  • Manual


by PowerReviews
Series 30 Series
Model 2031


Owner's Manual

Warranty Info:

2031 Single 31 Band Limiter and Graphic Equalizer

The manufacturer's warranty covers parts for two years and labor for two years from date of purchase. The warranty excludes damage from misuse, abuse, and contains other exclusions.