Free Shipping On Orders $9.99 or more Sam Ash Customer Service Sam Ash International Sales Sam Ash Store Locations Free Shipping Orders Over $9.99

Countryman Type 10 Direct Box

 
0.0

(No reviews)

Be the first to

Write a Review

SKU: CDT10XXXX-P

Print page
You need Flash player 8+ and JavaScript enabled to view this video.
  • Images (3)

Recommended Accessories

You May Also Be Interested In

MSRP: $299.99 $219.99 Save : $80.00 (27%)
More on the way - call 800-472-6274 or chat for availability
MSRP: $299.99 $219.99 Save : $80.00 (27%)
Add to Cart
  • Description
  • Reviews
  • Discussions
  • Specs
  • More Info

The Type 10 DI box combines exceptional ruggedness and versatility with an advanced design that sets a new standard for pure performance.

The Type 10 DI box is the ideal counterpart to our classic Type 85, combining the exceptional ruggedness and versatility of the Type 85 with an advanced design that sets a new standard for pure performance.

Most direct box designs must make difficult trade-offs with your sound: ultra-low distortion can only be attained by increasing input noise; true ground isolation means high phase deviation or signal attenuation. The Type 10 takes a radically new approach, with an analog circuit that tunes itself to deliver your sound with the lowest distortion, lowest noise, and highest accuracy of any direct box. The result is a clean, precise sound that is completely faithful to the original.

Outstanding Performance
The Type 10 achieves the highest SNR, lowest phase deviation, and lowest distortion of any DI. Some boxes achieve low distortion over a narrow range of frequencies and levels, but end up coloring the low frequencies and distorting loud signals. The Type 10 maintains exceptionally low THD and IMD across the entire audio band, and for a wide range of input voltages, rendering your sound with extremely high fidelity.

Indestructible
Like the Type 85, the Type 10 is armored inside and out, with a molded core wrapped in an extra thick architectural aluminium housing. The switches and connectors are fully recessed. The electronics are just as tough—both the Type 10 and the Type 85 shrug off static spikes and will survive with the input connected directly to 110 V or 220 V line voltage.

Versatile
Conditions on the road are not always ideal—noisy electrical systems, mix boards positioned across a stadium with low input impedance and low or no phantom power for your box. The Type 10 has rock solid isolation and is designed to drive any board across hundreds of feet of cable whether or not you have phantom power. That means that whatever environment you’re in, your sound will be consistently great.

Countryman Item No. DT10

Get yours today; with the security of our many decades of experience and Sam Ash Direct efficient order processing, your satisfaction is guaranteed!

Specs
Frequency Response: 10 Hz to 50 kHz (+/- 1 dB)
Deviation from Linear Phase: 30 Hz: +/- 2°; 100 Hz to 20 kHz: 0°
Noise (shorted input, BW = 22 Hz to 20 kHz): 1.8 uVrms (-115 dBVrms)
Distortion (1 Vpp in, RL= 1.2 kOhm through 200 feet of XLR cable): THD (1 kHz): < 0.001%; THD (30 Hz to 20 kHz): < 0.005%; IMD (10 kHz/60 Hz, 4:1): < 0.005%
Power Options: 48 V Phantom (1.5 mA); 9 V Battery (4.8 mA, 130 hours on a typical alkaline)
Input Protection: 220 Vrms and 20,000 V static discharges
Transformer Isolation Voltage: > 500 V from instrument ground to XLR output pin 1
Padding Settings: 0 dB; -15 dB; -30 dB
RF Filtering: Input: 1.5 MHz low-pass filter; Output: 60 kHz low-pass filter
Maximum Input Level (1% THD): 0 dB pad: 6 Vpp; -15 dB pad: 33 Vpp; -30 dB pad: 190 Vpp (Equal to 1,100 Watts into 4 Ohms)
Input Resistance: 0 dB pad: 10 MOhm; -15, -30 dB pad: 10 kOhm
Input Capacitance: 240 pF (equal to 3 ft of low-capacitance guitar cable)
Output Polarity: Pin 2 positive
Dimensions: 6" x 3" x 1.75" (152 mm x 77 mm x 45 mm)
Weight: 20.8 oz (0.59 kg)

REVIEW SNAPSHOT®

by PowerReviews
Information not available