Ship to Store! Hot Deals!

Avantone Pro CK-1 Small-Capsule FET Pencil Microphone

ACK1XXXXX-P

Print page
Image for CK-1 Small-Capsule FET Pencil Microphone from SamAsh
You need Flash player 8+ and JavaScript enabled to view this video.
  • Images (3)
Large View
  • Image for CK-1 Small-Capsule FET Pencil Microphone from SamAsh Image for CK-1 Small-Capsule FET Pencil Microphone from SamAsh
$149.00
Availability: In Stock

Buy Extended Service Plan ( What This? )

$149.00
Add to Cart

Product Rating:

 
0.0

(No reviews)

Be the first to

Write a Review
  • Description
  • Specifications
  • Reviews
  • Warranty
  • More Info

The Avantone CK-1 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics, but at a fraction of their cost!

The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.

The CK-1 includes (3) 19mm (3/4") interchangeable capsules to provide unlimited miking possibilities! Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The rugged CK-1 mic is able to produce professional results with a clean sonic character. The rugged body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly.

Also features separate -10 dB pad & 80 Hz LF roll off switches.The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

The high quality FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-1 for instrumental and percussion mikingIt exudes class visually as well as sonically. The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano. The CK-1 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents commitment to quality as these normally are the type of "upgrade" components that are implemented by microphone modder/hot-rodders!

The included SSM Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 capsules (cardioid, omni, and Hyper-cardioid) offer versatility for accommodating virtually any miking task.

Uses: Cymbals, Hi-Hats, acoustic guitar, drum overheads, piano, percussion, etc.


Specifications:
Type
True Condenser

Polar Pattern(s)
Cardioid , Hyper-Cardioid & Omni Capsules included

Frequency Response
25-20,000 Hz +/- 3dB

Output Impedance
<=200 Ohms

Maximum SPL
138dB (0.5% THD @1000Hz)

Sensitivity
15mv/pa

S/N Ratio
1Pa 78dB

Noise Floor
< 17 dBA

Output Connector
Male XLR 3-pin

High-Pass Switch
80 Hz 6dB/octave

Attenuation Switch
-10 dB

Power Requirements
Standard 48 Volt Phantom / 5mA

Dimensions
(23mm) x (153mm)

Weight
5 oz.

Finish
Polished Nickel trim / Metallic Cabernet Red Body

Includes:
  • Avantone CK-1 FET Microphone
  • Avantone SSM Shockmount
  • Elegant padded genuine wooden Mic box
  • 19mm Cardioid, Omni, and Hyper-Cardioid capsules
  • Owners Manual

Things You Will Get:

    CK-1 Microphone
    SSM Shockmount Padded genuine wooden Mic box
    19mm Cardioid, Omni, and Hyper-Cardioid capsules
    Owners Manual
Series .
Model CK-1

REVIEW SNAPSHOT®

by PowerReviews
Information not available