Ship to Store! Hot Deals!

Daking Audio Fet II Compressor

DFET2XXXX-P

Print page
Image for Fet II Compressor from SamAsh
You need Flash player 8+ and JavaScript enabled to view this video.
  • Images (2)
Large View
  • Image for Fet II Compressor from SamAsh Image for Fet II Compressor from SamAsh

You May Also Be Interested In

MSRP: $1,850.00 $1,495.00 Save : $355.00 (19%)
Availability: Temporarily Out Of Stock - Order Now!
MSRP: $1,850.00 $1,495.00 Save : $355.00 (19%)
Add to Cart

Product Rating:

 
0.0

(No reviews)

Be the first to

Write a Review
  • Description
  • Specifications
  • Reviews
  • Warranty
  • More Info

The FET II Compressor epitomizes the simplicity, quality, functionality and sound to successfully spawn at least two more compression products based on its design.

Click the "More Info" tab to download a free Daking manual
that tells you all about Compression
and how the FETII makes it easy!

"The FET II uses all discrete transistor Class A circuits, the best transformers and printed circuit board mounted switches. Signal capacitors are precision polypropylene or ultra low-leakage electrolytic types. Our boards are assembled on a mil-spec assembly line. The chassis are stainless steel for maximum RF and hum rejection and a long lasting finish. Every unit is hand finished, tested, burned in, and tested again in a second facility.

"Also, we just couldn't stand to use plastic knobs, so we designed our own anodized, engraved aluminum knobs that give a much more precise and quality feel. I designed my gear to be gear you'd own for life, not some passing fancy you'd leave in the dust once you figured what the good stuff sounds like. This IS the good stuff."

-Geoff Daking

The Fet II Compressor is a super fast FET (Field Effect Transistor) type compressor with transformer balanced inputs and outputs, all class "A" amplifiers and discrete circuitry. Jensen transformers are used for clean, accurate performance. All the parameters are set with positive switches, not pots, for accuracy. Tolerances of the components are low and each unit is tested and adjusted at the factory to make sure it falls within our tight specifications.*

Linking two units for Buss work is a breeze. Stereo linking is done by summing the DC control voltages of 2 or more units. (We have some customers who link 6 for 5.1 mixing). Because of the inherent accuracy of the mono units, the units track very well as multiple units. Fortunately the FET II does not trap you into one set or master controls. Each side of a stereo pair can be set identically (because of the positive switches) or individually. This gives you a great deal of flexibility with problem program material.

The attack and release times are picked by Geoff as the most useful and popular he has encountered. The attack times go from a quick 250 microseconds, up to 64 miliseconds. The longer attack times allow transients through for more "punch." Release times vary from single time constant at .5, 1, and 1.5 seconds, to more complex dual constants like the Neve 33609 auto mode, and A&D Compex 760 Auto. The last two are the level and time dependent triple time constants found on the Fairchild 670 settings 5 and 6; the second of which can have a release time as long as 200 seconds.

The VU meter can monitor input, output or gain reduction, and the compress/bypass/stereo link switch allows you to use each unit individually, not at all, or linked. As many as 8 units can be linked together for surround mixing.

Features:
  • Class "A" circuits for reduced crossover distortion
  • All discrete transistor circuitry
  • Transformer-balanced inputs and output
  • All parameters switch-selectable & repeatable
  • Threshold adjustable from -10 to +10 in 2dB steps
  • Ratios: 1.5:1 2:1, 3:1, 5:1, 10:1 and 20:1
  • Attack 250 microseconds to 63 milliseconds
  • Seven release time constants;
a: .5
b: 1
c: 1.5
d: Neve 33609 Auto
e: A&D Compex Auto
f: Fairchild 670 #5
g: Fairchild 670 #6
  • Make up gain: 0 to 11dB in 1db steps
  • 3-function VU Meter for Input/Output/Gain Reduction
  • Two Inputs:
a: XLR +4dbm transformer balanced
b: 1/4 TRS - 10dB transformer balanced
  • Stainless steel construction


*Each unit is optimized at 2:1 for buss compression. At 2:1 with the threshold set to "0", a  +4 input will give an output of 2.5db and a +14 input will give an output of 7.5 db  for an exact 2:1 ratio. The unit can maintain an accuracy of .05 db in this range for a single mono unit.

Things You Will Get:

    FET II Compressor
    User Manual
Number of Channels 1
Frequency Response 10Hz-56kHz
XLR Inputs 1
XLR Outputs 1
1/4" Inputs 1
1/4" Outputs 1
Digital Inputs N/A
Digital Outputs N/A
S/PDIF N/A
Compressor Yes
Side Chain I/O No
EQ No
Additional Controls/Features Three function VU meter
Stereo Link Output
Computer Connectivity No
Dimensions 19" x 1.75" x 12.25" (W x H x D)
Weight 5 lbs. 12 oz.
Manufacturer Number FET II

REVIEW SNAPSHOT®

by PowerReviews