- Back To School
- Hot Deals
- Live Sound
- Microphones & Wireless
- DJ & Lighting
To automatically re-order this item before you run out, select the recurring order option during checkout.
Integrated Shock Mount Isolation System for Kick Drum Microphones. Better Than A Boom Stand!
Better Than A Boom Stand!
The ULTIMATE Kick Drum Microphone Isolation and Shock-Mount System.
The PRO Series mounts are made from machined #303 Aluminum with a Limited Lifetime Warranty. If you're looking for a cleaner bass drum signal and you're willing to save some stage space while getting it, look no further than The Kelly SHU™.
The Pro series Kelly SHU™ kick drum microphone shock mounts have been road-tested and tour-approved by many of today's professional drummers and sound engineers. Through their constant set-up, teardown and travel on the road, The Kelly SHU Pro™ has reliably become a permanent part of their kick drum rigs.
Each Pro series Kelly SHU™ mount is individually machined from #303 high-grade aluminum stock, then anodized which allows the natural color of the aluminum to shine through.
The Kelly SHU™ is a whole new approach to kick drum microphone mounting systems. Both internal and external installations of the system utilize the bass drum's pre-existing hardware, which then becomes the framework for an integrated kick drum microphone shock mount and isolation support system.
The Kelly SHU™ provides your favorite standard kick drum microphone the shock-mounted, suspended platform needed to ward off stage vibration, low-end sound wave transfer and other mechanical interferences from clouding up your kick drum signal. The lengthy isolation cords provide an effective disconnection of the microphone from the kick drum and the stage that the kick drum sits on, both at the same time.
The KELLY SHU™ kick drum microphone mounting system will eliminate the requirement of a separate stand, boom arm and bulky counter-weight for the kick drum microphone. Not only does the system save you valuable floor space, but you'll also save time at set-up because the microphone can stay with the drum during transport. The Kelly SHU™ will stay in place, remaining positioned exactly where you want it every time you move and set up the drums! Just plug in and GO!
The Kelly SHU™ provides countless mounting positions - the adjustment possibilities are virtual unlimited! The system can be installed either inside the drum or on the front of the drum with both installations having equal benefit of the isolation and shock mount properties of our suspended system. Detailed instructions for both installation options are included with each system.
A few minutes, a tool to fit your interior tuning lug hardware screws and a pair of scissors is all you need to install The Kelly SHU™. It really couldn't be easier! For external installation, the scissors alone will get the job done. The Kelly SHU™ accepts standard XLR bass drum microphones and clips with no drilling required for installation!