Yamaha MW10C 10 Channel USB Mixer
If you have a computer -laptop or desktop, Windows™ or Macintosh™ -and you want to make music with it, Yamaha's got the setup for you. The MW USB Mixing Studio series mixers give you everything you need to turn your computer system into a complete, full- featured, high-performance home recording studio. The new MW uses a single cable USB connection to interface with your computer, for bi-directional audio data transfer. It gives you comprehensive signal input and mixing features in a compact size. It also includes the powerful Cubase AI4 music production software, allowing you to capture your performances, embellish and enhance them with plug-in synths and effects, and mix them down to stereo. In other words, the MW gives you all the elements of a recording system, one that is remarkably easy to set up and operate.
SINGLE USB CONNECTION, INSTANT STUDIO
With Yamaha’s MW10C USB Mixing Studio mixer, making great music is easier than ever before. Combined with the powerful Cubase AI4 audio/MIDI sequencing software, the new MW series provides a comprehensive tabletop studio setup for the solo recording musician and for the travelling producer/arranger. Connect the new MW to a USB terminal on your laptop or desktop computer, and you’ve got an instant, high-quality audio recording studio at your command. The MW delivers true plug-and-play USB audio input/output interfacing—without the need for special software drivers—and lets you easily record mono inputs or two- track stereo mixes of multiple sources to your computer.
FLEXIBLE 8-CHANNEL CONFIGURATION
The MW10C gives you a total of eight inputs, including four ultra-low-noise mic preamps. The high-performance balanced microphone inputs also have a phantom power switch, allowing you to take advantage of the superior sonic quality of professional-level condenser microphones.
ASSIGNABLE REC OUT
In addition to the normal stereo buss, the MW10C has assignable busses (REC OUT). This feature gives you addes flexibility in routing the signals for recording and monitoring. Turning on the ON switch for any channel immediately routes that channel to the USB terminal and enables it for recording. Multiple channels selected in this way are, of course, recorded to a stereo mix on the computer. In this condition, each channel is also mixed to the stereo buss and can be monitored (with the Monitor Mix function).
EASY-TO-USE 1-KNOB COMPRESSION
Compression—the taming of wildly varying levels in vocals, bass and guitar—is one of the most important effects used in recording and mixing. It is also one of the most subtle and difficult to use. Not with the new MW series mixers, however. The innovative 1-knob analog compressor (on the mono input channels) lets you dial in just the amount of compression you need in recording, without having to set multiple parameters like threshold, ratio and makeup gain. One knob does it all for you—instantly giving you great, punchy sound.
MONITOR MIX
This convenient feature gives you simple control over the balance between the signals being recorded and the playback signals being monitored. This is particularly helpful when recording several sources at the same time, letting you use a single knob to adjust the balance of the playback and recording signals for monitoring purposes. Naturally, this doesn’t affect the recording level; it simply allows you to control what you want to hear.
EASY-ACCESS PANEL AND HIGH-QUALITY PARTS
Top-mounted input and output connectors make setting up and re-patching your system quick and easy. Both models feature high-quality Neutrik balanced XLR connectors for the microphone inputs. Long-throw, smooth-action faders give you precise and tactile control over signal levels. The mixer also has a bright and large 12-segment LED meter for visual signal indication.
CHANNEL ON SWITCHES
Dedicated On switches for each channel let you enable or disable (mute) individual input channels as desired, while the lamps on the switches give you instant visual indication about which channels are on.
Specifications:
- Frequency Response ST OUT, REC OUT, AUX (EFFECT*) SEND, MONITOR OUT -3.0, 0, 1.0 dB, GAIN: min(CH 1-2, CH 3/4-5/6), 20Hz-20kHz, refer to the nominal output level @1kHz
Total Harmonic Distortion (THD+N) ST OUT Less Than 0.1 %, +14dBu, 20Hz-20kHz, Input Gain Control at minimum - Hum&Noise (Hum & Noise are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation) CH INPUT 1-4 MIC -128 dBu, EIN(Equivalent Input Noise): Rs=150ohms, GAIN:max
ST OUT, REC OUT -87 dBu, ST MASTER CONTROL at nominal level and all Ch level controls at minimum.
AUX (EFFECT) SEND -85 dB, All Ch AUX controls at minimum.
ST OUT, REC OUT -64 dB, ST Master control and one Ch level control at nominal level. (CH1,2)
ST OUT -100 dB, Residual Output Noise. - Crosstalk @ 1 kHz Input to Output -70 dB, STEREO L/R, CH 1-2, PAN panned Hard left or right.
- Phantom Voltage MIC +48 V
- USB Audio I/O Sampling Frequency 44.1, 48 kHz, Depend on the application of PC
- Input HPF CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct
- Input Equalization (+15,-15dB maximum) Turn over/roll-off frequency of shelving:
3dB blow maximum variable level. High 10 kHz shelving (CH 1-2, CH 3/4-5/6)
Mid 2.5 kHz peaking (CH 1-2, CH 3/4-5/6)
Low 100 Hz shelving (CH 1-2, CH 3/4-5/6)
High 10 kHz shelving (CH 7/8)
Low 100 Hz shelving (CH 7/8) - PEAK Indicator Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu).
- Foot Switch (Digital Effect, on/off)
- LED Level Meter Pre MONITOR Level 2x7 points LED meter (PEAK,+6,+3,0,-5,-10,-20 dB)
- PEAK lights if the signal comes within 3 dB of the clipping level.
- Power Supply Adapter PA-10
- Power Consumption 21 W
- Dimensions W x D x H (mm) 256.6 x 302.5 x 62.2
- Net Weight 1.7 kg
- Option: Microphone Stand Adaptor(BMS-10A)
Warranty:
One year parts and labor.
