SE Electronics USB2200A USB Microphone
The sE Electronics USB2200A is the first truly professional USB studio condenser microphone. The design follows in the lineage of the award winning SE2200a, featuring a 1” hand crafted gold plated diaphragm and class A discrete FET electronics, offering low self noise.
Proprietary Innovation
The USB2200a offers technology and features not found on any other USB microphone. First, a headphone output (stereo mini) and volume control on the mic allow the user to set the mix output from their audio software versus the mic for monitoring, all with ZERO latency, a first! Second, the audio output is simultaneous from the XLR and the USB, and the USB2200a may be powered via either phantom through the XLR or via USB. Third, the USB voltage is conditioned to address the usual noise problems associated with using power from USB.
- Frequency Response: 20Hz-20KHz
- Sensitivity: 14.1mV/Pa -37 ± 1.5dB
- Polar Pattern: Cardioid
- Impedance: = 200 Ohms
- Equivalent Noise Level: 12dB(A weighted)
- Max SPL for 0.5% THD @ 1000Hz: 130dB
- Power Requirement: Phantom power 48V±4V
- Connector: 3-pin
Technical Parameters:
- USB 2.0 USB1.x compatible
- Stereo D/A and A/D conversion
- Zero latency Headphone monitoring
- Gain Control built in
- At THD > -90db, SNR 96db (D/A conversion)
- At THD > -90db, SNR 92db (A/D conversion)
- Adaptive 44.1 to 48KHz sampling frequency
SE Electronics USB2200A USB Microphone
The manufacturer's warranty covers parts for two years and labor for two years from date of purchase. The warranty excludes damage from misuse, abuse, and contains other exclusions.
