Tannoy TS10 Active 10" Powered Studio Subwoofer
An exceptionally sturdy and rigid cabinet is the basis of the TS10, ensuring a extraordinary control of the drive unit and minimizing unwanted cabinet resonance. It utilizes a substantially built, down-firing drive unit with an oversized magnet system. The massive roll surround allows substantial cone excursion providing the necessary air movement to ensure very extended low frequency output.
BASH® amplifier technology is utilized in these subwoofers; a patented high efficiency power amplifier circuit topology that has taken the best of Class D and Class AB and created a new Class of its own. The digital power amplifier with its patented switch mode power supply delivers exceptional performance and excellent bandwidth with long-term reliability. Very high-power amplifiers are fitted (300 Watts RMS) ensuring there is ample power to reproduce dynamic movie scores.
Achieving the optimum settings is easy; low frequency extension can be varied from around 60Hz down to the unit’s lowest operating frequency via a control on the rear panel to allow the subwoofer to be adjusted to match the relative frequency in relation to the main monitor system. Versatile connectivity is offered through a selection of input and output sockets; stereo line level inputs can either utilise or bypass the system’s internal crossover circuitry. XLR sockets are provided for direct connection to the mixing desk and output to active main speakers. The output can be selected as either a direct feed or switched to provide an 80Hz HIPASS function.
Other features include an auto power on and sleep function whereby the system will go into a ‘stand-by’ mode if no signal is detected for approximately 12 minutes. Soft-clip limiting is incorporated to limit the maximum sound output in order to eliminate audible distortion. Gain and phase controls are provided to allow easy adjustment for output level and precise matching with the room and the rest of the system.
PERFORMANCE
- Peak output power 300Watts RMS
- Low frequency response 29Hz
- Inputs 2 x line level phono, 2 x XLR balanced
- Input filter 2nd order low pass, 50Hz - 150Hz, -6dB
- Auto mute After approximately 12 minutes in absence of input signal
DRIVE UNITS
CONSTRUCTION
- Enclosure type Closed box
- Volume 16.75 litre / 0.6cu.ft
- Dimensions 323 x 286 x 286 mm (12 11/8 x 11.3 x 11 5/16 inches)
- Additional features Phase control, Crossover, defeat switch for LFE operation, Soft limiting to avoid overload, LF extension control
- Mains voltage 120V nominal AC~, 60Hz, 230 nominal AC~, 50Hz
- Mains fuse 120V - T3.15AL / 250V, 230V - T1.6AL / 250V
- Weight 9.5kg / 21lbs
- Finish Black
Tannoy TS10 Active 10" Powered Studio Subwoofer
The manufacturer's warranty covers parts for five years and labor for five years from date of purchase. The warranty excludes damage from misuse, abuse, and contains other exclusions.
