Rane TTM57SL DJ Mixer with Serato Scratch LIVE Software
The TTM 57SL combines the best Rane and Serato have to offer in a single, high performance mixer. Finally a mixer that fully integrates mixer hardware, software and software controls in one powerful package. The TTM 57SL combines all the performance and features of the Rane TTM 56 with Serato Scratch LIVE software. Rane didn't stop there -- they also included internal effects with six stereo insert points.
The TTM 57SL allows the user to simultaneously:
Play a combination of digital and analog sources. Play up to two digital files controlled by vinyl or CD while recording your mix. Or, record two stereo sources when not using vinyl or CD control. Cue analog and digital sources. Operate standalone as a no-compromise performance mixer. Applications
Battle / Live Performance DJ Night Club Mobile DJ Radio / Broadcast DJ Mixtape DJ Podcasting Remix Project Studio / Post ProductionTTM 57SL Hardware Features
Two Input Buses
PGM 1 selects: Analog 1, Analog 2, Digital 1, Digital 2 PGM 2 selects: Analog 3, Analog 4, Digital 1, Digital 2 All analog inputs are phono or line capable Input Gain and Left/Right Pan controls 3-band, full cut Tone controls with Kill switches Magnetic faders for Channel Faders and Crossfader
Non-contact magnetic position sensor technology. No travel noise - No bleed - Ever! Independent Contour and Reverse controls Microphone Input with Engage switch, Level control and 2-band Tone control
Three sets of Outputs, each with independent Level controls
Main Out on XLR (balanced) Booth Out on 1/4" TRS (balanced) Auxiliary Out on RCA (unbalanced) Assign Program 1, Program 2 or Both to external FlexFx loop
Internal Filter and Delay Effects with six possible insert points
Pre- or Post-channel faders for Program 1 and Program 2 Main Mix Auxiliary Input Bus Headphone Cue Monitor includes Cue Pan, Main Mix select and Level
8 Channels of Streaming Audio
16 bit / 44.1 kHz Streaming Audio Four channels from computer Stereo source Digital 1 and Digital 2
Four channels to computer Stereo Record 1 and Record 2
Stereo Recording
Record 1 and Record 2 may record: Pre- or Post-channel faders for Program 1 or Program 2
Main Mix
Auxiliary Input Bus
Vinyl / CD Control Inputs
Stereo Record 1 may be used for 4-channels of control Select Analog 1 or Analog 2 for Control Input 1 Select Analog 3 or Analog 4 for Control Input 2 Additional "soft" mixer controls used by Scratch LIVE & internal effects
Foot switch input (Inputs on Tip and Ring; foot switch not included) Deck 1-2 switch Group switch B1 - B6 programmable switches P1 - P2 programmable Encoders with push switches J1 - J2 programmable Joysticks with push switches USB firmware updates Internal universal switching power supply
System Requirements:
The minimum operating system requirements are either a 1 GHz Mac G4 with OSX 10.3, or a 1.5 GHz PC running Windows XP with Service Pack 2, either with 1G of ram or more.
Versions 1.7.2 and higher include support for the Microsoft Vista operating system. Note that we recommend Windows XP over Vista, most notably for performance reasons. You will be able to run XP at a lower USB buffer setting, meaning lower latency and better performance using XP than is achievable with Vista.
