Shure WL50B Subminiature Lavalier Microphone (Black with 4 Pin Mini Jack)

Shure WL50B Subminiature Lavalier Microphone (Black with 4 Pin Mini Jack)

Black, standard sensitivity, 5-ft attached cable with TA4F connector. Shure's WL50 lavalier microphone series sets a new standard for miniature microphones. Visually unobtrusive, the WL50s are ideal for theater, television broadcast, video/film, and event production. Designed for applications that require minimal visibility without compromising sound quality, these microphones are available individually, as well as with the Shure UHF and UC Wireless Systems.

• Subminiature size (5.8 mm diameter x 11 mm height)
• Electret condenser cartridge
• Omnidirectional pattern
• Two termination options: 4-pin mini connector (fits directly into Shure wireless transmitters), or unterminated (bare wire)
• Two sensitivities available: Standard: -40 dBV/Pa (for speech applications) Reduced: -50 dBV/Pa (10 dB more headroom for theater applications)
• Interchangeable equalization caps for optimal clarity and response
• All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens
• Frequency response: 20-20,000 Hz

Specifications:

• Polar pattern: Omnidirectional
• Input impedance: 20K ohms
• Output level: 45.0 dBV/Pa (1 Pa=94 dB SPL)
• Max SPL: 133 dB at 1% THD/20 kilohm load
• Frequency Response: 20 to 20,000 Hz
• Dynamic Range: 103.0 dB
• Output Noise: 30 dB typical; 33 dB maximum
• Signal to Noise Rati 64 dB at 94 dB SPL
• Power Requirements: +5 Vdc on pin 2, return on pin 1 (ground)
• Current drain: 60?130 µA
• Polarity: Pin 3 relative to pin 1 at the output connector of the microphone.
• Cable and Connector: 1.5 m (5 ft.), small-diameter, shielded, with miniature female 4-pin connector