Shure PGX14 Performance Gear Wind Instrument Wireless System
It's never been easier to go wireless – and sound like a pro. Shure's new PGX|Performance Gear Wireless brings the superior sound of Shure Microphones together with innovative setup features. Durably constructed, with multiple frequency bands and included carrying case, PGX|Performance Gear is the perfect system for performers on the go who want worry-free performance, every time. System includes: PGX1 Beltpack; PGX4 Receiver; and Beta 98 Clip-on Condensor Microphone. Audio Reference Companding
Audio Reference Companding is a level-dependent companding scheme. Instead of companding across the entire dynamic range like most wireless systems (causing a whooshing audio artifact known as "breathing"), companding only occurs at high audio levels. These levels are high enough to make the companding artifacts inaudible.
No "breathing" noise Lower noise floor More headroom - won't clip as easily Clearer sound at all audio levels Sounds more like a wired mic PGX4 ReceiverShure’s PGX4 receiver makes wireless setup a snap. With features like Automatic Frequency Selection and Automatic Transmitter Setup, the PGX4 offers the best in wireless to performers on the go. Automatic Transmitter Setup Automatic Frequency Selection 90 Selectable frequencies across 18 MHz bandwidth 1/4 wave antennas Microprocessor- controlled diversity Channel display LED XLR and 1/4" outputs PGX1 BodypackDesigned to meet the needs of traveling performers, Shure’s PGX1 can be used with headworn, lavalier, or instrument microphones, or with guitars or basses. Automatic Transmitter Setup Multi-function LED Indicator ((power, lockout, mute, low battery) -10db pad 2 AA batteries provide 8 hours of continuous use 18 MHz operating range Beta 98 Clip-on Condensor MicrophoneThe Shure Beta 98H/C (also available as the WB98H/C for use with wireless systems) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances. The Beta98H/C features a 3m (10 ft.) high-flex cable with attached preamplifier (XLR connection). The WB98H/C features a 1.6m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters. Tailored frequency response for open, natural sound reproduction Compact, lightweight construction provides a low degree of visibility Interchangeable microphone cartridges are available: RPM108 - Cardioid cartridge RPM110 - Supercardioid cartridge Gooseneck, ratcheting swivel joint, and gooseneck angle brace allow for optimum placement and fixed positioning Legendary Shure ruggedness and reliability Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website atwww.fcc.gov/cgb/wirelessmicrophones.
Shure PGX14 Performance Gear Wind Instrument Wireless System
Monitor mixers, personal monitors, phonograph, wireless: One year parts and labor Wired microphones: Two years parts and labor
