Phonic PMR3243 Mixer
Why settle for budget consoles and lose important features? Check out the MR3243 - it rivals the big boards in performance and price! 20 Mono Strips The MR3243 come with 20 balanced microphone/line inputs, 2 stereo balanced line inputs, 4 groups, 6 aux sends, and 4 stereo balanced effect returns. Talkback, effect return to monitor, inserts, 6 LED meters and phantom power. Front Pannel Functions A unique MS matrix employed for CH 1 & 2; MS metering can be read from the L/R meter; Pre/post fader listening through the console; Clear indication for pre/post listening and solo; Front panel control phantom power for maximum convenience and indication; Front panel control MIC/LINE switch. +10 to +60dB gain adjustment for microphone and -10 to +40dB gain adjustment for line and +/-12dB for stereo inputs. 3/4 Band EQ 3-band mid sweep equalizer with 18dB/oct low-cut filter for MIC/LINE channels, and 4-band equalizer for stereo channels. 6 aux send knobs with 3/4 switchable for pre- or post-fader send. Constant power pan pot for precise control over the sound image. Mute and routing switches sit next to the high quality 60mm channel fader. The Solo button is located at the lowest position and separated by Peak and -20dB/solo LEDs in order to prevent operational error. 4 True Groups Balanced output as well as insert in/out are provided for all 4 audio groups, each with a 12 segment LED level meter. Hi and low equalizers and Pan pots are also included for these groups. L/R buttons allow the user to send the group to main L/R and Mono outputs. Aux & Solo Aux send masters are lined up in a row to make control over the mixed level. Solo buttons allow easy monitoring of any single output as well as level readout. Efx Rtn The effect returns can be sent to groups and main outputs by routing switches via level control. Solo and read level of any single effect return is only a button away. Independent level send knobs for Aux 1 and 2 allow precise control of the effect level mix into stage monitoring (or studio monitoring). The headphone jack is conveniently located on the right-hand side of the control surface, followed by the level control knob which functions as it also is for the control room monitors. A pre/post switch sets the solo mode in pre- or post-fader monitoring for level matching. Talkback A hidden talkback microphone is located at the bottom right-hand corner of the control surface where pick up is best and most convenient, especially when compared to a gooseneck microphone. A level control to set the talkback level and 2 momentary buttons send talkback to L/R or Aux and mute the control monitor at the same time. 60mm Fader Main L/R outputs are controlled by a linear 60mm master fader as the house level or final mix level, with a rotary fader to control the mono output level conveniently placed on the control surface (not at the back panel!). User First Design The MR3243 is convenient to use and aesthetically pleasing. For sound contractors, this console meets most demands in all kinds of installations: public venues; auditoriums; halls; schools; churches; amusement parks and more. Features 20 mono input channels for a wide range of microphone and line level signals from separate input sockets2 stereo line inputsAdditional direct output on 1~20 channel for multi-track recording3-band swept midrange EQ on mono input channelsPhantom power are divided into 5 groups, each includes 4 mic channelsLow cut switch6 auxiliary mix sendAuxiliary 3/4 can be switched to pre or post faderSolo on each input and outputGroup 1/2, 3/4, or L/R mix send switchableOn buttons on each input channel4 switchable stereo aux returns with routing switches4 true groups with 2-band EQ, pan, solo and L/R assignBuilt-in Talkback microphone can be assigned to L/R or Aux outMS matrix input l Record output l 6 x 12-segment LED level meterMeter indicator switch allows meter to show MS/ST levelExtremely low noise pre-amplifiers
