Mackie SR1530z 15" 3 Way Powered PA Cabinet

Mackie SR1530z 15" 3 Way Powered PA Cabinet

The Mackie SR1530z is a high-efficiency, extreme output, horn-loaded, 3-way, wide-dispersion, Active sound reinforcement system. The one-piece 90° x 40° horn, which includes both the mid- and high-frequency sections in Mackie's Optimized Wavefront™ system, fires the HF content slightly down into the midrange dispersion pattern. This creates a focused, single wavefront with excellent coverage, phase and power response characteristics. Couple this with Mackie onboard Active electronics, featuring FR (fast recovery) amplifiers, time- and phase-correction crossover, and tuned wooden enclosure, and you've got one formidable loudspeaker system.

Low-Anxiety Design
Tri-amplified systems always sound better than passive speakers driven by a single power amp. But few of us can spend the extra money on electronic crossovers and extra power amps. Not to mention all the extra hassle and setup. Mackie's Active electronics take all the guesswork out of system configuration and hookup. Just plug in the power cable and the signal line from your board or snake — they've already done the rest for you. No need for racks of amps and processing gear when you've got Mackie Active Loudspeakers. And the built-in Active crossover sends the optimal signal to each of the internal amplifiers, which were custom designed for their respective transducers.

Cool... Running, That Is.
The high-current amplifier modules sit atop a massive aluminum heatsink that totally eliminates the need for fans. Another tremendous benefit of having these amplifiers located within the loudspeaker cabinet is that the SR1530z functions as a complete system, optimizing acoustic, electronic, and mechanical designs to achieve the highest level of performance and value.

If You Want To Sound Good, Get Wood
For extreme output applications, molded speaker cabinets just can't keep up. That's why the SRz Series loudspeakers are constructed with extremely resonant 18mm Baltic Birch ply. Wood of this quality sings at high volumes, delivering crisp, even tone at volumes that would pulverize the competition.

The Rear Panel
The rear mounted amplifier assembly features separate signal and AC power panels separated by the heatsink. The signal input panel contains:

Features:

• Three-Way Amplified, with 300W RMS low-frequency, 100W RMS mid-frequency and 100W high-frequency amplifiers 
• Built-in Active circuitry provides precision crossover, electronic time correction, phase alignment and equalization 
• Patented WaveFront™ horn design provides wide dispersion and very natural sound 
• 44mm (1.75") titanium dome compression driver with optimized symmetric phase plug 
• 152mm (6") horn-loaded, high-output mid-range transducer 
• 381mm (15") LF woofer with high-temperature voice coil 
• Wide-dispersion, ultra-low distortion, high frequency horn design 
• 126 dB SPL @ 1kHz / 1 meter 
• Frequency Response: 38Hz to 20kHz 
• Complete electronic and component protection circuitry 
• Weight balanced with carrying handles for easy portability

LOUD Technologies Inc. warrants all materials, workmanship and proper operation of this product for a period of five years from the original date of purchase with the following exception: warranty on all its loudspeaker components including woofers and compression drivers are only warranted for two years. If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty period, LOUD Technologies, at its option, will repair or replace the product. This warranty applies only to equipment sold and delivered within the U.S. by LOUD Technologies Inc. or its authorized dealers.