JOEMEEK sixQ Channel Strip with Digital Output
The Joemeek sixQ Channel Strip packs a wealth of features into a single rack space studio channel. A single channel mic pre, based on the high quality Burr-Brown IC, three bands of highly musical EQ, and (of course) Joemeek's signature optical compressor make for a highly capable recording instrument. Speaking of instruments, there's even an instrument level input on the front panel! Output either analog or digitally directly to your sound card or DAW for a warm, musical analog sound - just what you've been looking for! Digital Interface: The Joemeek Digital Audio Interface provides high quality digital audio outputs. The digital audio outputs are compatible with most digital recorders, as well as Digital Audio Workstations and mixers. S/PDIF format is available from the RCA phono connectors. The Joemeek Digital Interface has highly stable onboard master clocks for low-jitter, hi-fi results. Internal sample rates of 44.1kHz, 48kHz, 88.2kHz or 96kHz are selected by means of rear panel switches. 44.1kHz is the standard used for audio CD's, while 48kHz and 96kHz are widely used in recording studios. In general, the higher the sample rate, the better the audio fidelity, but the more disk space is required for the recording. For example, recording at 96kHz requires twice as much storage as 48kHz. Consult the manual of your recorder or DAW as to what sample rates it will accommodate. Specifications: Input impedances: Mic: 1.2kohm; Line: 20kohm Pre-amp overall gain: 10dB to 60dB (variable) Common mode rejection: 70dB Equivalent input noise: -128.5dBu (unweighted) Distortion: 0.001% (below Compressor threshold) Frequency response: 15Hz to 70kHz (-3dB) Maximum input before clipping: Mic: +21dBu; Line: +45dBu Headroom before clipping: +21dBu Compressor threshold: -6dBu to +22dBu (variable) Compressor rati 1:1 to 10:1 (variable) Compressor attack time: 1 msec to 100 msec (adaptive) Compressor release time: 0.1 sec to 3 sec (adaptive) Nominal output levels: +4dBu/-10dBv Output impedance: 75ohm Output Level switch: 12dB attenuation Noise Floor: -85dBu (typical, with ~40dB mic gain) VU Meter: Analogue movement Power supply: 115V / 230V ac mains, 50/60Hz Power consumption: 30W Mechanical: 482W x 88H x 220D (overall) Weight: 3 kilos High Pass Filter: 12dB per octave cut below 80Hz EQ Boost & Cut: +/-15dB (zero phase-shift bell response) LF Frequency : 40Hz to 650Hz variable Mid Frequency : 300Hz to 5kHz variable HMF Frequency : 1kHz to 6kHz variable HF Frequency : 6kHz/12kHz switchable EQ “Q” 0.9 (1.6 octaves Digital Output Specifications: Sampling: 24 Bit Sampling Rate: 44.1kHz, 48kHz, 88.2kHz or 96kHz selectable Output Formats: AES3 compliant (balanced), S/PDIF electrical, S/PDIF optical External Word Clock input: 75ohm, 1.25V - TTL level, 44.1kHz to 96kHz (auto synchronising)Get your Joemeek sixQ Channel Strip today from Sam Ash Direct and enjoy the confidence that comes from fast, free shipping, the guaranteed lowest price and our 45/60-day return/price protection policy.
| Audio Connections |
Microphone Input, Line Input, Insert, Balanced and Unbalanced Outputs |
| Presets |
n/a |
| Sampling Rate |
44.1kHz, 48kHz, 88.2kHz or 96kHz selectable |
| Compression |
Yes |
| MIDI Connections |
No |
| Model |
SixQ |
| Series |
N/A |
| Signal to Noise Ratio |
-85dBu (typical, with ~40dB mic gain) |
| Memory |
None |
| Power Supply |
115V / 230V ac mains, 50/60Hz |
| Frequency Response |
15Hz to 70kHz |
| Dynamic Range |
+21dBu gain before clipping |
| Sync or Timecode |
Yes |
| Number of Channels |
1 |
| Effects |
No |
| Crosstalk |
N/A |
| Display Type |
n/a |
| Phantom Power |
No |
| Dimensions |
19 x 3.5 x 8.6 |
| Product Weight |
6.2 |
| EQ |
Yes |
JOEMEEK sixQ Channel Strip with Digital Output
The manufacturer's warranty covers parts for three years and labor for three years from date of purchase. The warranty excludes damage from misuse, abuse, and contains other exclusions.
|
