JBL SRX712M 12" 2 Way Passive Floor Monitor
The SRX712M is a world-class, professional stage monitor. The SRX712M uses a JBL 2262H 12" patented* Differential Drive woofer and a 2431H 75 3" voice-coil, neodymium compression driver for 800 watts (continuous) power capacity from a monitor with a profile that is only 12 inches above the stage.
A 50° x 90° aluminum horn provides smooth, even coverage whether the performer is standing right on the speaker or moving upstage. Bi-amp or full-range passive operation may be selected by a recessed, high-current switch mounted in the handle cup. NL4 connectors are provided on both ends of the speaker to keep cable runs tidy on stage.
The SRX712M can also do double duty as a utility speaker. For use on a tripod or over a subwoofer, JBL's dual angle pole mount is included. This feature allows the speaker to be mounted in a vertical position or with a 10° down tilt for optimum audience coverage. If suspension or truss mounting is a requirement, add the optional SRX712M-YK yoke bracket. This accessory provides attachment points for a wide range of suspension and truss mounting hardware.
The enclosure is constructed of top quality birch plywood and coated in JBL’s rugged DuraFlex™ finish. The attractive CNC-machined, 16-gauge steel grille wraps around the sides of the enclosure so there are no protruding lips on the front of the box to create acoustical interference. The grilles are internally lined with acoustically transparent foam to provide additional driver protection and give a very professional appearance.
Features:
Compact and low-profile for minimal obstruction of audience sight-lines. 90°x 50° nominal coverage. Bi-amplified or full-range passive operation. Dual-angle pole socket for applications requiring tripod mounting. Optional yoke available for trussmounted or suspended applications. Neodymium magnet Differential Drive® woofer for high-power capacity and very light-weight. 3 in (diaphragm) neodymium magnet compression driver.
Specs:
System Type: 12", two-way, bass-reflex, stage-monitor / utility Frequency Range (-10 dB): 70 Hz – 20 kHz Frequency Response (±3 dB): 83 Hz – 18 kHz Coverage Pattern: 50° x 90° nominal (Monitor position) Crossover Modes: Bi-amp / passive, externally switchable Crossover Frequency: 1.2 kHz Power Rating (Continuous1 / Program / Peak): Passive: 800 W / 1600 W / 3200 W; Bi-amp LF: 800 W / 1600 W / 3200 W; Bi-amp HF: 75 W / 150 W / 300 W Maximum SPL2: 131 dB SPL peak System Sensitivity (1w @ 1m): 96 dB SPL (passive mode) LF Driver: 1 x JBL 2262H 305 mm (12 in) Differential Drive woofer HF Driver: 1 x JBL 2431H 75 mm (3 in) voice coil, neodymium compression driver Nominal Impedance: Passive: 8 ohms; Bi-amp LF: 8 ohms; Bi-amp HF: 8 ohms Active Tunings: dbx DriveRack, all models. Settings available at www.jblpro.com Enclosure: Symmetrical stage monitor, 15 mm, 11-ply birchplywood. Suspension / Mounting: Dual-angle (0° or -10°), 35 mm pole socket 2 x M10 fittings for optional SRX712M-YK yoke Transport: Integrated handle / input cup Finish: Black DuraFlex finish Grille: Powder coated, black, 16-gauge perforated steel with acoustical transparent charcoal foam backing. Removable JBL badge and punched JBL logo. Input Connectors: Neutrik® Speakon® NL-4 (x2), one on each end Optional Accessories: SRX712M-CVR: Pull-over padded cover SRX712M-YK: Suspension / mounting yoke
JBL SRX712M 12" 2 Way Passive Floor Monitor
The JBLWarranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of the original purchase. Enclosures and all other JBL products are warranted for two years from the date of the original purchase.
