JBL PRX635 15" Three-Way Powered PA Cabinet
This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with extended low frequencies of the PRX618S-XLF, one experiences complete control over the entire audio spectrum. These cabinets can be stand-mounted but do require a large footprint tri-pod type stand. When pole mounting the PRX635 on a subwoofer we highly recommend a pole no longer than 24” (SS3BK-24 or SS4BK-24) to ensure stability and safety. As with all the full-range PRX600 Series systems two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs. The PRX635 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth. The PRX635 is comprised of one 380 mm (15 in) 265F Differential Drive® woofer, a 165 mm (6.5 in) 195H horn-loaded 90° by 50° mid-range and a 2414H 25.4 mm (1 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt (3 x 500) Audio Class-D power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob. All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, lightweight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent- resistant 16-gauge steel and handles are made from lightweight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14-gauge steel and have been tested with a yield-strength of 1000 lbs. each.
Features : Maximum SPL 135 db peak380 mm (15 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer165mm (6.5 in) horn loaded midrange transducer25.4mm (1 in) polymer diaphragm compression driver1500 Watt (3 x 500 watt) Class-D, Crown® digital amplifierDSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQProfessional XLR line and ¼" Mic/Instrument inputs, with loop throughObsidian DuraFlex™ coated plywood constructionLarge die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort8 M10 Suspension points and 1 pullback pointIntegrated 36mm pole mount socket
Special note: The PRX635 should be pole-mounted on a PRX 600 subwoofer using a pole no longer than 24” in length. (SS3-BK24 or SS4-BK24)
| Model |
PRX635 |
| Series |
PRX600 |
| Number of Speakers |
2 |
| Input Connectors |
Balanced XLR / ¼" combo jack with XLR loop-through |
| Normal Impedance |
20K ohms (balanced), 10K ohms (unbalanced) |
| Frequency Range |
(-10 dB): Flat 41 Hz-19 kHz Boost 40 Hz-19 kHz |
| Frequency Response |
(±3 dB): Flat 53 Hz-18 kHz Boost 50 Hz-18 kHz |
| Drivers |
1 x JBL 265F-1, 380 mm (15") Differential Drive® dual voicecoil and magnetic gap, neodymium woofer / 1 x JBL 195H, 165 mm (6.5") horn-loaded midrange transducer / 1 x JBL 2414H 25.4 mm (1") annular polymer diaphragm, neodymium compression driver |
| Maximum SPL |
135 dB peak |
| Crossover Frequency |
460 Hz, 2.75 kHz |
| Horizontal Coverage |
50° |
| Power Output |
over 701W |
| Vertical Coverage |
90° |
| Speaker Size |
15" |
| Product Weight |
60 lbs |
| Dimensions |
36.29" x 16.9" x 16.27" (H x W x D) |
JBL PRX635 15" Three-Way Powered PA Cabinet
The JBLWarranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of the original purchase. Enclosures and all other JBL products are warranted for two years from the date of the original purchase.
|
