Electro-Voice CP1200 Power Amplifier

	Zoom H1 Handy Recorder Portable Digital Recorder	$99.99
	Furman PL-PLUS DMC 19 Inch Rackmount 15 AMP Power Conditioner	$324.95
	Samson Q7 Supercardioid Dynamic Mic	$79.99
	Wesco 220617 Superlite Folding Hand Truck Cart	$121.95
	Ebtech HE-2 Hum Eliminator	$65.99
	Samson LS2 Lightweight Speaker Stands	$59.00

Electro-Voice CP1200 Power Amplifier

The CPS Series are high-performance amplifiers with unmatched dynamic range capability, ensuring the most reliable operation favored by sound contractors in all sound reinforcement applications. The CPS Series achieves its outstanding dynamic range through the use of EV's unique nonlinear signal monitor. This feature limits amplifier distortion to less than 1 percent, eliminating the "hard-edged" clipping which can destroy most speaker systems. The amplifiers' power supply is specifically designed to deliver high peak signals, proving a burst signal output capability headroom more than 30% over their average continuous rating.

Electro-Voice's Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability.

With up to 2 x 600 watts into 2 ohms and 2 x 400 watts into 4 ohms, the CP1200 is ideal for small full-range cabinets and individual hi-frequency components in multiway systems. The CP1200 uses a conventional transformer power supply. This 2 rack space unit weighs only 31 lbs. ( 13.5 kg )

Features:

MAXIMUM MIDBAND OUTPUT POWER (THD = 1%, 1 kHz, Dual Channel): 600W @ 2 Ohms; 400W @ 4 Ohms; 240W @ 8 Ohms

RATED OUTPUT POWER (THD = 0,1 %, 20 Hz ... kHz): 300W @ 4 Ohms; 150W @ 8 Ohms

MAX. SINGLE CHANNEL OUTPUT POWER (Dynamic Headroom, IHF-A): 1100W @ 2 Ohms; 580W @ 4 Ohms; 300W @ 8 Ohms

MAXIMUM BRIDGED OUTPUT POWER (THD = 1%, 1 kHz): 1200W @ 4 Ohms; 800W @ 8 Ohms

MAXIMUM RMS VOLTAGE SWING (THD = 1%, 1 kHz): 50V

POWER BANDWIDTH (THD = 1%, 1 kHz, half power @ 4 Ohms): 10 Hz - 60kHz

VOLTAGE GAIN (ref. 1 kHz): 32.0 dB

INPUT SENSITIVITY (Rated power @ 8 Ohms, 1 kHz): +1.15 dBu (0.88 Vrms)

THD @ rated output power: < 0.05 %

IDE- SMTP 60 Hz, 7kHz: < 0.02 %

DIM30 3.15 kHz, 15 kHz: < 0.01 %

MAXIMUM INPUT LEVEL: +22 dBu (9.76 Vrms)

CROSSTALK ref. 1 kHz, rated output power: < -80 dB

FREQUENCY RESPONSE ref. 1 kHz: 15 Hz ... 40 kHz (±1dB)

INPUT IMPEDANCE active balanced: 20 kOhms

DAMPING FACTOR 1 kHz: > 300

SLEW RATE: 25 V/µs

SIGNAL TO NOISE RATIO (A-weighted): 103.5 dB

POWER REQUIREMENT: 240V, 230V, 220V, 120V or 100V ; 50 ... 60 Hz (factory configured)

POWER CONSUMTION: 600W

PROTECTION: Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-On delay

COOLING: Front to Rear, 3-stage Fans

DIMENSIONS (W x H x D): 483mm x 88.1mm x 368.8mm (19” x 3.5” x 15.22”)

WEIGHT: 13.5 kg (30.8 lbs)

Power Output (@ 8ohms)	Less than 250
Power Output (8/4/2 ohms/Bridged Mono)	240/400/600/800
Audio Connections	INPUT: XLR / OUTPUT: Speakon, XLR
Distortion	< 0.05%
Indicators	Power, Protect, Signal, 0 dB, Limit
Damping	> 300
Model	CP1200
Series	CPS Series
Signal to Noise Ratio	103.5 dB
Power Output	240/400/600/800
Crosstalk	< -80 dB
Sensitivity	+1.15 dBu (0.88 Vrms)
Dimensions	19 x 15.22 x 3.47
Product Weight	29.76
Voltage	32.0 dB
Fan	Yes
Front Air Intake	Yes
Rear Air Intake	No
DSP	No

Electro-Voice CP1200 Power Amplifier

Electro-Voice CP1200 Power Amplifier

Things You'll Get:

Things You'll Need: