quick order shopping cart Items, $
TRM-2s Stereo Tremulator Effect Pedal
TRM-2s Stereo Tremulator Effect Pedal

My Recent Viewed Items

Demeter TRM-2s Stereo Tremulator Effect Pedal

(DTRM2SXXX-P)

List Price: $359.00

Our Price: $309.00

You Save: $50.00

 

Availability: Coming Soon - Order Now

  

 

Free FEDEX ground shipping!

Special Offer
Join Our Email List!
Enter your email address:

Things You'll Get:

What you get with Demeter TRM-2s Stereo Tremulator Effect Pedal

Effect Pedal

Things You'll Need:

(Check an item to add it to your cart.)

Genesis 100 Guitar Stand $29.99
MS7920B Kick Drum or Amp Microphone Stand $29.99
GA1 Guitar / Bass Tuner $14.99

Seen a lower price? We'll BEAT IT!

Demeter TRM-2s Stereo Tremulator Effect Pedal

The same analog Tremolo circuit found in Demeter's Classic mono Tremolo pedal but with added Stereo circuitry. You can get the same classic Tremulator tone with one amplifier, or hook up two amps for the sweeping, pulsing sound of stereo. With both phase and sync controls, all sorts of cool stereo effects are possible.

Designed to emulate the classic Fender tremolo effect (or vibrato as it is often referred to), the Stereo Tremulator features "lopsided" amplitude modulation with a rounded off triangular modulated waveform. In the stereo mode the super cool tone of a Magnatone Amplifierís Tremolo is reproduced.

Operation is fairly straightforward. There is one 1/4" input and one 1/8" 9volt input on the Right side of the unit on the left side there are two 1/4" outputs, A and B, one for each amplifier.

There are Three control knobs on the unit: Depth 1 which effects output A, Depth 2 which effects output B and Rate which controls the speed of the tremolo effect for both outputs. There are two switches Phase and Sync. Plus a footswitch to bypass the effect, and an LED to indicate effect operation. On the side there is a trim pots to set the bias for the optical units.

Depth affects the amount of amplitude modulation on the signal or the amount of effect. The tremulator design incorporates a small amount of gain (approx. 1dB) to allow for proper "tremulation." Also, by turning the Depth all the way off, the TRM-2s will function as a low noise volume boost. Its low-impedance output allows it to act as a line-driver, eliminating signal loss on long cable runs.

Rate increases and decreases the frequency of the low-frequency oscillator, enabling you to time the effect as desired.

Phase, can change the audio phase of output a to either in or out of Phase.

Sync and change the tremolo effect to be in sync between outputs A and B, or out of sync. That is, In sync, the volumes of both outputs modulate together or out of sync the volume of one output goes up as the other goes down, coupled with the phase reversed you get a swirling phase shifting sound.

Trim pots set the bias of the optical tremolo units. It affects the signals on and off time ratio. Turned up to high it will squeeze the signal, low it will loosen it. The unit comes preset to Ry Cooder's preferred setting.

A hybrid of vintage sound and state-of-the-art quality, the Demeter Stereo Tremulator is designed for years of trouble-free operation.

Power supply: 9 volts DC. Either external or internal. For internal power, use a 9-volt battery. To access, remove the four screws on the bottom of the unit and pull apart. Note: battery must have at least 7 volts for unit to work! External power supply using mini plug, tip positive, 9 volt DC regulated (100 milliamp or more).

Inputs/Outputs (1) 1/4" Input, (2) 1/4" Outputs
Model TRM-2S; Stereo Tremulator
Controls Depth 1, Depth 2, Rate, Phase In/Out, Sync In/Out
Number of Pedals 1
Stereo Yes

Demeter TRM-2s Stereo Tremulator Effect Pedal

Join Our Email List!
Enter your email address: