Audio Technica ATM35 Cardioid Condenser Microphone
The ATM35 Clips to brass, reeds, piano, acoustic bass, snare and toms and provides a crisp, clear, well-balanced response, even at high SPLs. UniMount® clip permits accurate positioning while protecting element. Operates on battery or phantom power. 25' (7.6 m) cable permanently attached to mic, TA3F connector at power module.
Specifications
- Element: Condenser
- Polar Pattern: Cardioid
- Frequency Response: 30 - 20,000 Hz
- Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Signal to Noise Ratio: 67 dB, 1 kHz at 1 Pa
- Dynamic Range (Typical): 118 dB, 1 kHz at Max. SPL
- Phantom Power Requirements: 11 - 52V, 2 mA typical
- Battery Type: 9V
- Battery Current/Life: 1 mA/1000 hours typical
- Switch: Off/on-flat/on-roll-off
- Low Frequency Roll-off: 150 Hz, 12 dB per octave
- Weight: 0.3 oz (8.5 g)
- Power Module: In-line
- Output Connector: XLRM-type on power module
Included Accessories:AT8418 UniMount® instrument mount; AT8532 power module; protective pouch.
