Audio Technica AT3035 Cardioid Condenser Microphone

Audio Technica AT3035 Cardioid Condenser Microphone

Designed for critical home/project/professional studio applications and live performance, this 30 Series large-diaphragm side-address cardioid condenser delivers exceptional detail and low noise. With its extended low-frequency response, the AT3035 produces rich, full sound reproduction and handles extremely high sound pressure levels with ease. Tailored for a smooth, natural sound, this mic is a perfect complement for digital recording equipment. Along with its rugged construction and high-performance specifications, the AT3035 provides an exceptional level of consistency from model to model.

• Custom-engineered large diaphragm for exceptional detail and low noise
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• High max SPL, wide dynamic range and optimized output level provide unmatched versatility
• Low self-noise (12 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
• Extended low-frequency response for rich, full sound
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Custom shock mount provides superior isolation
• Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad

Specifications:

• ELEMENT Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN Cardioid
• FREQUENCY RESPONSE 20-20,000 Hz
• LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa
• IMPEDANCE 250 ohms
• MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• NOISE 12 dB SPL
• DYNAMIC RANGE (typical) 136 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO 82 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical
• SWITCHES Flat, roll-off;
  10 dB pad (nominal)
• WEIGHT 13.8 oz (390 g)
• DIMENSIONS 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter
• OUTPUT CONNECTOR Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED AT8458 shock mount for 5/8"-27 threaded stands; soft protective pouch
• AUDIO-TECHNICA CASE STYLE R5