ZVex Effects Hand Painted Lo-Fi Junky Guitar Effect PedalSKU: ZIJ003343-P
In Stock & Ready To Ship!
- Images 1
Hello, and welcome to the world of the Instant Lo-Fi Junky. Any of you who've heard the sound of the Lo-Fi Loop Junky will understand this pedal immediately... its purpose is to imitate that sound in real time. Joel Korte, the extraordinary engineer behind this new device, was able to create a combination of THAT chip compression, Belling bucket-brigades, and ultra low-current National Semiconductor op-amp filters to exquisitely copy the texture and feel of the original Lo-Fi into this new and extraordinary box, adding some new sounds that have never been heard before.
To get the basic real-time Lo-Fi sound, turn the middle knob all the way to the right and set the waveform switch to triangle. By adjusting the speed and depth it’s pretty easy to achieve a very similar texture to the original Lo-Fi Loop Junky. Lower the tone knob if you wish to darken the tone.
Next, try turning down the middle knob all the way toward the "comp" side. With this setting you'll enjoy a remarkably spanky bright and clear compression. It lasts forever but has dynamics like there’s no tomorrow. As you turn the middle knob back toward the Lo-Fi side, you’ll hear the chorus blend start to happen. The sparkly clear compressed signal will mix with the smashed, lo-fidelity warbled signal and become a luscious emulsification that can be blended to the most perfect depth. Unlike other choruses where the only depth control you have is the depth of the sweep oscillator, this unit lets you set exactly how much of the two signals are present in the mix... more clear compression if you want the sound to be basically clean with a hint of chorus, blended 1-to-1 for pure chorusing sound, or mostly vibrato with a hint of chorus by turning the knob mostly to the right. The chorus sound sounds most traditional with either the sine or triangle setting. They are subtly but noticeably different.
Now try switching the waveform to square and set the middle knob mostly to the compression side (to the left). You can blend in just enough of the square-wave modulated Lo-Fi sound to make it really eerie. For the spookiest sound, set the speed control to the tempo of your performance and the depth all the way up, adjusting the mix for just enough modulation.
- Volume: Overall output volume for the unit
- Tone: Can be used to lower the brightness of the Lo-Fi signal (the vibrato sound). Does not affect the compressed signal
- Comp/Lo-Fi: Adjusts anywhere between full compression and full vibrato mix. Blending the two (somewhere between the extremes) creates a chorusing sound
- Speed: Adjusts the speed of the Vibrato (only affects the Lo-Fi sound)
- Depth: Sets the depth of the Vibrato (only affects the Lo-Fi sound)
- Waveform: Sets the waveform of the Vibrato’s modulation. The traditional Lo-Fi Loop Junky simulation setting is triangle
Get your ZVex Effects Hand Painted Lo-Fi Junky Guitar Effects Pedal from Sam Ash Direct today at the guaranteed lowest price from Sam Ash Direct with our 45-day return and 60-day price protection policy.
Series Hand Painted Model Instant Lo-Fi Junky
All handpainted Z. Vex pedals are warranted to be free from manufacturing defects for as long as Zachary Vex is on the planet. Due to the hand-painted nature of these products: colors, styles, and designs may vary. The finish may have naturally occurring flaws, which are not covered by warranty. Vexter series pedals (non hand-painted) carry a 2-year non-transferrable warranty against manufacturing defects.