Mission VM-PRO Volume Pedal (Special Edition Carbon Print)SKU: MVMPROCNX-P
- Images 1
- Video 1
The VM-PRO resolves many of the common issues with volume pedals that cause tone sucking and mismatching problems whatever your instrument. The VM-PRO works with most guitars including electric, electro-acoustic, baritone or bass. It also works with many other instruments including electronic keyboards, steel guitars, and instrument microphones such as harmonica and horn mics.
The VM-PRO features high quality onboard buffers. These buffers help maintain the frequency response when using long cable runs and multiple effects. In other words: No tone suck! If you’ve ever experienced reduced top end and a general loss of sparkle from your instrument plugged into a pedal board, then a good quality buffer at the start of your signal chain can help. The Mission buffer is a top of the line audiophile grade circuit, and being integrated right into the volume pedal, you can avoid having to use a separate device, reducing the cable count and saving space and weight on your pedal board.
VM-PRO is designed for flexibility, and includes switchable options that let you tune it to your specific requirements. You can place the volume pedal anywhere in the signal chain without mismatch issues, so you can place it first and use it for swells and clean/boost control, last as a master volume, or anywhere in between. You can even use the VM-PRO in an effects loop.
A selectable output impedance lets you use the volume pedal with vintage fuzz and other devices that would normally be incompatible with a volume pedal. Placing the VM-PRO in front of a fuzz allows you to roll back the volume to clean up just like using the volume knob on your guitar, but with more precise control. A switchable gain stage lets you set the pedal for use with high output active pickups without clipping, and the unique Mission Sparkle switch restores some of the top end brightness thats typically lost as you roll back the volume.
Last, but by no means least, is is completely isolated secondary output that routes an additional, unaltered signal from the pedal. Primarily intended for use as a tuner out, use of this output won’t cause any signal loss on the main output regardless of what is connected to it, as the two outputs are completely isolated inside the pedal. The tuner out remains active independent of pedal position so you can tune silently, at full volume, or anywhere in between without the tuner sucking your tone.
The Secondary out can also be used for advanced studio and recording functions such as re-amping and side chaining. Use it to send a dry signal direct to a mixing desk or DAW, or split the signal between two different effect chains.
Get your Mission Engineering VM-PRO Volume Pedal today at the guaranteed lowest price from Sam Ash Direct with our 45-day return and 60-day price protection policy.
Weight . Dimensions . Series VM Model PRO
This Limited Warranty applies only to Mission branded products (collectively referred to in this document as “Mission Hardware Products”) sold by Mission Engineering Inc. and its worldwide subsidiaries, affiliates, authorized resellers, or country distributors (collectively referred to in this Limited Warranty as “Mission”). The term “Mission Hardware Product” is limited to the hardware components, and firmware where present. The term “Mission Hardware Product” DOES NOT include any software applications or programs; non-Mission branded, and third party products such as MIDI controllers, amplifiers, effects and similar units from other manufacturers. However, non-Mission manufacturers, suppliers, or publishers may provide their own warranties directly.
Mission guarantees that the Mission Hardware Products that you have purchased from Mission are free from defects in materials or workmanship under normal use during the Limited Warranty Period. The Limited Warranty Period starts on the date of purchase. Your dated sales or delivery receipt, showing the date of purchase of the product, is your proof of the purchase date. You may be required to provide proof of purchase as a condition of receiving warranty service. You are entitled to hardware warranty service according to the terms and conditions of this document if a repair to your Mission Hardware Product is required within the Limited Warranty Period.
During the Limited Warranty Period, Mission will, at its discretion, repair or replace any defective component. All component parts or hardware products removed under this Limited Warranty become the property of Mission. In the unlikely event that your Mission Hardware Product has recurring failures, Mission, at its sole discretion, may elect to provide you with a replacement unit that is the same or equivalent to your Mission Hardware Product in performance, or provide a refund of the purchase price. This is your exclusive remedy for defective products.
It is mandatory that the unit product number and serial number be made available when requesting a warranty service event. Failure to do so may result in the event being deemed out of warranty by Mission or Authorized Service Providers.
Mission may repair or replace Mission Hardware Products with new or previously used products or parts equivalent to new in performance and reliability, or with equivalent products to an original product that has been discontinued. Replacement parts are warranted to be free from defects in material or workmanship for ninety days, or for the remainder of the Limited Warranty Period of the Mission Hardware Product they are replacing, whichever is longer.
The warranty is applicable to the original purchaser of new Mission hardware products purchased from Mission Engineering Inc, or a Mission Authorized Dealer. Warranty is not applicable to purchases of used products and/or purchases from unauthorized sellers. No refunds of the purchase price will be made by Mission to the original or any subsequent owner.
For more Warranty information on Mission Engineering products: