Quilter Labs MicroPro Mach 2 MP200-10 1x10" Guitar Combo AmplifierSKU: QMACH2C10-P
- Images 5
- Video 1
Select to Compare
The Quilter 10 inch Mach 2 combo is the choice for those looking for a more vintage, "chewier," and "rounder" sound. A smart compromise between the light weight of the 8 and the heavier weight of the 12, the 10 inch features a very potent Celestion G-10 Vintage driver. (Weight 21 pounds.) In Quilter's sealed enclosure, the 10 inch Celestion delivers warm and beautiful mids with a deep and resonant low end articulation. Best for electric instruments, especially when they are overly bright, the 10 inch delivers warm and uncompromising tone. If you already have a 10 inch speaker that you love, or if you are used to the sound of a 10 inch, this is your amp. Combine this with Quilter's 12" extension cabinet for staggering power that will easily handle outdoor gigs without a PA system.
The Quilter Labs MicroPro Mach 2 10" combo comes equipped with two channels, both of which offer 100 watts of power for a total of 200 watts when used together. It provides you with powerful tone-shaping tools for unmatched sonic versatility including a 3-band EQ, an onboard Boost with 5 unique Boost settings, a built-in Voice knob with 6 of the most popular and sought-after tones in guitar amplification, a Hi-Cut knob that allows you to roll off on the high frequencies, and an onboard limiter. The MicroPro Mach 2 10" combo also features integrated footswitchable effects including Tremolo with Rate control and a shared Reverb for both channels with Tone and Dwell controls. The MicroPro Mach 2 10" combo also features a unique Phase switch that reverses the amplifier's polarity which can reduce or increase guitar feedback as desired for particular playing styles.
Channel 2 of the MicroPro Mach 2 10" combo sports a 1/4" / XLR combo jack to provide you with incredible flexibility. You can use this as a clean guitar channel preset, or you can plug in a microphone. You can even plug in your mp3 player and jam along with your favorite backing tracks. Channel 2 comes equipped with an independent gain control (Gain 2) as well as an EQ control knob for sound shaping. Please note that the footswitch is required for multi-channel application.
On the back of the Quilter Labs MicroPro Mach 2, you will find an 8 ohm internal speaker output, a 4-8 ohm external speaker output, an Effects Loop, a Footswitch jack for use with a Quilter Labs foot switch, and an isolated Direct Output that allows you to connect to external powered loud speakers or a mixing console for recording or live performances.
All Quilter Labs combo amps come complete with a durable ballistic nylon amp cover.
This is the perfect amp for you if...
- You are a musician that plays electric and wants beautiful warm mid range with a taming of the highest frequencies.
- You have a guitar that tends to be overly bright or a hollow body that enjoys resonant and warm mids without so much feedback.
- You want more power than an 8 inch speaker and won't use as a portable PA.
- You want to sound good and look good doing it.
- Powerful: 100 watts per channel. 200 watts total when using channel 1 and 2.
- Toneful: Patented next generation analog technology.
- Portable: Take it on board the plane and put in the overhead bin.
- Reliable: Stop fussing with 70 year old unreliable technology and play more!
- Ultra-Light: This is the second lightest of Quilter's combo amps. About as heavy as your guitar in its case.
- Modular: Combine this with Quilter's matching extension speaker, or use your own for outdoor or extremely loud gigs.
- Flexible: Works with nearly any impedance, or even with the speaker unplugged.
- Consistent: Quilter's power supply auto-adapts regardless of the voltage the wall is dishing out. Your tone never suffers, even from "nightclub voltage."
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Amp Type Analog Channels 2 Watts 100 Per Channel, 200 Total Digital FX Yes USB No Reverb Yes Other Features 1 x 10" Celestion G10 Vintage Speaker Weight 21 lbs. Dimensions 17.5 x 19 x 10 inches (WxHxD) Series MicroPro Mach 2 Model MP200-10
Quilter Laboratories, LLC (Quilter Labs) guarantees its products to be free from defective material and/or workmanship and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use - provided the unit is returned to our factory via pre-paid transportation with a copy of proof of purchase. (i.e. sales receipt). This warranty provides that the examination of the return product must indicate, in our judgment, a manufacturing defect. This warranty does not extend to any product which has been subjected to misuse, neglect, accident, or where the date code or serial number has been defaced or removed. Quilter Labs shall not be liable for incidental and/or consequential damages. This warranty gives you specific legal rights.
This limited warranty is freely transferable during the term of the warranty period. The warranty on Quilter products is NOT VALID if the products have been purchased from an unauthorized dealer/online e-tailer, or if the factory serial number has been removed, defaced, or replaced in any way.
Customers may have additional rights, which vary from state to state or from country to country. In the event that a provision of this limited warranty is void, prohibited or superseded by local laws, the remaining provisions shall remain in effect. The Quilter Labs limited warranty in the United States is valid for a period of three (3) years from date of purchase except that footswitches, covers, cabinets, handles, and cabinet hardware are warranted for a period of one (1) year and speakers, and all other included accessory products for a period of ninety (90) days from date of purchase.