dbx ZonePro 1261 Digital Zone Processor (RS Controlled)


dbx ZonePro 1261 Digital Zone Processor (RS Controlled)


(No reviews)

Be the first to

Write a Review
$699.95 $874.94 Save: $174.99 (20%)
  • Images 1
$699.95 $874.94 Save: $174.99 (20%)

Add to Cart
Add to Wish List
Select to Compare

  • Description

    Designed to offer superior system sonic performance and flexibility, the 1261 delivers the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 1261 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression.

    The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO™ every tool is at your disposal to maximize the response of your system.

    Beyond processing, the ZonePRO™ products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters. The addition of Ethernet control means that not only will it work with standard network equipment, but it can also be accessed from remote dialup locations or from wireless access points.

      •  Advanced Feedback Suppression (AFS™) •  Autowarmth® •  Auto Gain Control •  Compression •  Limiting •  Noise Gating •  Notch Filtering •  Bandpass and Crossover Filters •  Parametric EQ •  Security Lockout •  Wall Panel Control •  RS-232 Control •  IEC, UL and CSA Approvals


    Number of Inputs: 12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF
    Connectors: Euroblock (Line and Mic) RCA (Source)
    Impedance (Euroblock): > 50kO Balanced, >25kO Unbalanced, RF Filtered
    Impedance (RCA): >25kO Unbalanced, RF Filtered
    Max input line level: +20dBu Mic/Line, +12dBu RCA
    CMRR: > 40dB, typically >55db @ 1kHz
    Mic Pre gain: 30 to 60dB
    Mic EIN: > 118dB, 22Hz-22kHz, 150O Source Impedance
    Mic Phantom Power: 15V
    Number of Outputs 6
    Connectors: Euroblock
    Type: Electronically balanced, RF filtered
    Impedance: 120 ohms balanced, 60ohm unbalanced
    Max Output Level: +20dBu
    Type: dbx Type IV™ conversion system
    Dynamic Range line: >113 dB, A-weighted, >110 dB unweighted
    Type IV dynamic range: >119 dB, A-weighted, 22kHz BW
    >117 dB, A-weighted, 22kHz BW
    Sample Rate: 48kHz
    Dynamic Range: 112 dB A-weighted, 109dB unweighted
    Dynamic Range: >110 dB A-weighted, >107dB unweighted
    THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain
    Frequency Response: 20Hz - 20kHz, +/-0.5dB
    Interchannel Crosstalk: >80dB typical
    Crosstalk input to
    output: >80dB
    Propagation Delay 0.6 msec
    Operating Voltage: 100-240 VAC, 50/60Hz
    Power Consumption: 27 Watts
    Weight: 6.8 lbs.(3.1 kg) Shipping weight 8.8 lbs. (4.0 kg)
    Dimensions: 1.75” H x 5.75” D x 19” W
    Note: Specifications subject to change without notice.
    Safety Agency Certifications: UL 60065, IEC 60065, E 60065, EN 55013

  • Reviews


    by PowerReviews
  • Discussions

  • Specification

    Series ZonePro
    Model 1261
  • Attachments

    Warranty Info:

    ZonePro 1261 Digital Zone Processor (RS Controlled)

    The manufacturer's warranty covers parts for two years and labor for two years from date of purchase. The warranty excludes damage from misuse, abuse, and contains other exclusions.