Audix D2 Hypercardioid Dynamic Microphone


Audix D2 Hypercardioid Dynamic Microphone


(No reviews)

Be the first to

Write a Review
$129.00 $159.00 Save: $30.00 (19%)
  • Images 3
$129.00 $159.00 Save: $30.00 (19%)

Add to Cart
Add to Wish List
Select to Compare

  • Description

    The D2 is used for stage, studio and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.

    The D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets and brass.  Transformer less design, low impedance and balanced output insure that the D2 will perform interference-free.

    Dynamic hypercardioid drum and instrument microphone has warm contoured response for added bottom and punch. Ideal for drums, instruments, and brass. Features VLM noice reduction capsule, compact design for easy placement and is milled from a solid block of aluminum for reduced weight and greater durability.

    The D2 has an extremely tight (hypercardioid) pick-up pattern in order to help eliminate sound
    from other instruments on stage from “bleeding” into the microphone. For this reason, it the D2
    is exceptionally effective in capturing the sound of each component of a drum or percussion kit.

    Drums, hand percussion: As a general rule, the bottom of the D2 grill should be 1-2 inches
    above the head of the drum and pointed towards the center. For more “ring” pull the mic back
    towards the rim. For less ring and more overtones, position the mic 1-2 inches inside the ring. For
    more attack, place the mic very close to the head and for more overtones and decay move the
    mic further away from the head.

    Guitar cabinets: The D2 can be placed within 1-2 inches of the grill cover at a 90 degree angle
    pointing directly into the speaker. If the mic is placed closer to the edge of the speaker, you will
    minimize the higher frequencies and get a warmer, fatter tone. To capture more highs, move the
    mic closer towards the center of the speaker, but avoid the middle of the speaker.

    Horns: Place the mic within 1-2 inches of the bell, especially when on a stage with drums, bass,
    guitar, etc. For jazz, classical, and music where the stage volume is lower, the mic can be placed
    further away for a richer, fuller sound.
  • Reviews


    by PowerReviews
  • Discussions

  • Specification

    Series Instrument Dynamic Series
    Model D2 Hypercardioid Dynamic Microphone
    Microphone Type Dynamic
    Polar Pattern Hyper-Cardioid
    Frequency Response 80Hz-18kHz
    Output Impedence 250 ohms
    Dynamic Range (SPL) 144dB
    Low Cut Filter N/A
    Connector Type XLR
    Self Noise 9.5dB
    Pad N/A
    Manufacturer Number D2
    Weight 4.5 oz.
    Dimensions 3.9 inches
  • Attachments

    Warranty Info:

    D2 Hypercardioid Dynamic Microphone

    The manufacturer's warranty covers condensers and wireless systems for three years and dynamic microphones for five years. The warranty excludes damage from misuse, abuse, and contains other exclusions.