T-Rex Engineering Replica Delay Pedal


Print page
Image for Replica Delay Pedal from SamAsh
You need Flash player 8+ and JavaScript enabled to view this video.
  • Images (1)
Large View
  • Image for Replica Delay Pedal from SamAsh Image for Replica Delay Pedal from SamAsh
MSRP: $539.00 $399.00 Save : $140.00 (26%)
Availability: In Stock

Buy Extended Service Plan ( What This? )

MSRP: $539.00 $399.00 Save : $140.00 (26%)
Add to Cart

Product Rating:


(No reviews)

Be the first to

Write a Review
  • Description
  • Specifications
  • Reviews
  • Warranty
  • More Info

The Replica delivers the warmth of tube echo with the sonic quality of a digital delay, all in one rock-solid pedal!

TIME, REPEAT, MIX and LEVEL knobs allow for quick, precise control. A Hi-cut button cuts high frequencies on repeats - perfectly simulating the tone of a 60s era tape echo. With a simple flick of a switch you can alter the delay’s subdivision parameter from 1/4 to 1/8 triplets, and to make the delay fit your purpose T-Rex even added a Tap-Tempo switch to get you right in time with your tune. Play it and youll buy it!

The DIRECT plug on the top side is an output plug. The "dry" signal is send directly through the pedal to the DIRECT plug without disturbance.

You can use this plug to:
- send the signal to a tuner
- send the signal to an extra amplifier and get a stereo like sound, when playing two amplifiers
- make a retro sound.

You send the delayed signal using the OUTPUT plug to a stereo simulator, that sends the stereo signal to two amplifiers. You connect a third amplifier using the DIRECT plug. Retro sound!

The ECHO –knob determines the amount of processed signal in the signal mix.
- In minimum position only the direct signal is heard
- In maximum position only the delay (processed signal) is heard

The LEVEL –knob sets the overall volume.
At maximum level, the signal is boosted approx. 3dB.

The REPEAT –knob controls the number of repetitions of the delay signal.
- In minimum position the delay signal is only repeated once
- In maximum position the delay signal is repeated to almost infinity

The TEMPO –knob sets the delay time.
- Minimum delay time is approx. 12 milliseconds
- Maximum delay time is approx. 1500 milliseconds
The LED indicator below the TEMPO inscription indicates the delay time.
When the TEMPO –knob is turned while playing, the delay signal is muted.

The TAP TEMPO -footswitch enables you to tap the delay time while playing.

The SUBDIVISION –button generates quarternote triplets of the tapped or dialled-in tempo. First you hit the button, then you tap the tempo/beat using the TAP TEMPO switch. It is recommended to use a drum machine or similar to hold the beat while using the SUBDIVISION function.

The BROWN –button is a High-Cut filter that alters the tone of the repeats. The result is a warmer, smoother delay sound reminiscent of the tone of a 60´s era tape echo.

The MIDI –socket allows you to control the tempo externally. (CTL. No. 20)



External control:
MIDI IN (CTL. No. 20)

INPUT-Jack 6,3 mm.
OUTPUT-Jack 6,3 mm.
DIRECT OUTPUT-Jack 6,3 mm.

Power supply (comes with the pedal):
100, 115 or 230V AC/50-60Hz, depending on your country standard. It provides 12 volt AC and 300 mA. If you want to use another power supply, you must accept these figures.

However the pedal does work with a 12 volt DC power supply, but it consumes at least 300 mA. Some DC power supplies cant deliver the sufficient power - at peaks. So you should go higher, to probably 500 mA.

Usually you can hear if the power is not sufficient.

Effect usage:
5 watts


Things You Will Get:

  • Effect Pedal
  • Power Supply
  • Manual
Model Replica Delay Pedal


by PowerReviews

Replica Delay Pedal

The manufacturer's warranty covers parts for two years and labor for two years from date of purchase. The warranty excludes damage from misuse, abuse, and contains other exclusions.

Information not available