Countryman Type 10S Stereo Direct Box

 
0.0

(No reviews)

Be the first to

Write a Review

SKU: CDT10SXXX-P

Print page
You need Flash player 8+ and JavaScript enabled to view this video.
  • Images (1)

Recommended Accessories

You May Also Be Interested In

MSRP: $550.00 $399.99 Save : $150.01 (27%)
In Stock & Ready To Ship!
MSRP: $550.00 $399.99 Save : $150.01 (27%)
Add to Cart
  • Description
  • Reviews
  • Discussions
  • Specs
  • More Info

Two channels of industry-leading technical performance, built tough and packed with new features.

The Type 10S Stereo Direct Box is a two-channel version of the Type 10 Direct Box. Each channel uses the same innovative circuitry as the Type 10—delivering industry leading technical performance—with some new features that add versatility.

Unmatched Performance
The Type 10S will not distort your sound regardless of the frequency or level of the audio source you plug in. The frequency response is flat from 10 Hz to 50 kHz, with a phase response that is linear within 2 degrees for the full audio range. The combination of flat and extended frequency response with linear phase delivers clean and accurate transient response which is essential for preserving the true character of the source.

Powering Options
Since the Type 10S uses an active circuit, your signal level is preserved, not padded by 20 dB or more as with passive boxes. This means that any noise and interference added by all of the following devices in the signal chain will be 20 dB less relevant to your overall sound quality. Although active circuitry requires power to operate, we decided to give you some easy options for powering the Type 10S. You only need to provide phantom power to Channel A, and, if you don’t have phantom available, the Type 10S will automatically use its internal battery which lasts for over 100 hours.

Indestructible
As with all Countryman DIs, the box is mechanically and electrically designed to survive on the road. The shell is constructed of thick extruded aluminum. The circuit board is potted in epoxy, and protected electrically from high voltage discharges at the input. All switches and connectors are fully recessed—if a switch gets flipped, it is only because you absolutely intended to do so. Transformer isolation is tested for each box by connecting 500 V AC from instrument ground to pin 1 for both XLR outputs.

Countryman Item No. DT10S

Get yours today; with the security of our many decades of experience and Sam Ash Direct efficient order processing, your satisfaction is guaranteed!

Specs
Frequency Response: 10 Hz to 50 kHz (+/- 1 dB)
Deviation from Linear Phase: 30 Hz: +/- 2°; 100 Hz to 20 kHz: 0°; Noise (shorted input, BW = 22 Hz to 20 kHz): 1.8 uVrms (-115 dBVrms)
Distortion (1 Vpp in, RL= 1.2 kOhm through 200 feet of XLR cable): THD (1 kHz): < 0.001%; THD (30 Hz to 20 kHz): < 0.005%; IMD (10 kHz/60 Hz, 4:1): < 0.002%
Cross-Talk Rejection: > 105 dB (20 Hz to 20 kHz)
Power Options: 48 V Phantom (1.5 mA); 9 V Battery (4.8 mA, 130 hours on a typical alkaline)
Input Protection: 220 Vrms and 20,000 V static discharges
Transformer Isolation Voltage: > 500 V from instrument ground to either XLR output pin 1
Padding Settings: 0 dB; -15 dB; -30 dB
RF Filtering: Input: 1.5 MHz low-pass filter; Output: 60 kHz low-pass filter
Maximum Input Level (1% THD): 0 dB pad: 5 Vpp; -15 dB pad: 28 Vpp; -30 dB pad: 158 Vpp
Input Resistance: 0 dB pad: 10 MOhm; -15, -30 dB pad: 10 kOhm; RCA and 1/8" inputs: 20 kOhm
Input Capacitance: 240 pF (equal to 3 ft of low-capacitance guitar cable)
Output Polarity: Pin 2 positive
Dimensions: 6.25" x 4" x 2" (159 mm x 102 mm x 51 mm)
Weight: 31.2 oz (0.88 kg)

REVIEW SNAPSHOT®

by PowerReviews
Information not available