Audio Technica AT4040 Cardioid Condenser Microphone
AAT4040XX-P
Recommended Accessories
-
On-Stage Euro Boom Microphone Stand and Cable
$35.99
-
On-Stage MY410 Shockmount (for Studio Condenser Microphones)
$29.99
$43.99Save : $14.00(32%) -
Monster Cable P500M Performer 500 Microphone Cable with Gold Contact XLR (Assorted Lengths)
$34.95 to $89.95
-
Strukture 20' Microphone Cable
$17.99
$39.99Save : $22.00(55%) -
Blue Microphones The Pop Universal Pop Filter
$44.99
$69.99Save : $25.00(36%) -
$24.99
$48.40Save : $23.41(48%) -
Samson PS01 Microphone Pop Filter
$29.99
$89.99Save : $60.00(67%) -
On-Stage DS7200B Desktop Microphone Stand
$17.99
$23.99Save : $6.00(25%) -
Sabra SSM-POP Universal Shockmount & Pop Filter System
$69.99
$129.95Save : $59.96(46%) -
Auralex 1114 SonoFlat Absorbtion Panel (1'x1'x2" Box of 14)
$89.00
$129.99Save : $40.99(32%) -
Primacoustic Voxguard IsoTools Ambient Noise Attenuator
$99.00
$120.00Save : $21.00(18%) -
SE Electronics Project Studio Reflexion Filter
$199.00
$249.00Save : $50.00(20%) -
On-Stage SMS7650 Hex Base Studio Boom
$119.99
$296.99Save : $177.00(60%) -
RapcoHorizon Concert Series M5 Microphone Cable (Assorted Lengths)
$25.99 to $97.99
-
Samson S-Phantom 48 Volt Phantom Power Supply
$49.99
$79.99Save : $30.00(38%)
Buy Extended Service Plan ( What This? )
- Description
- Specifications
- Reviews
- Warranty
- Attachments
The AT4040 side-address condenser microphone features an advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. A marriage of technical precision and artistic inspiration, the AT4040 offers exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility. This ultra-consistent microphone may be used with confidence in a wide variety of studio and live miking applications, even under the stringent demands of digital recording systems. The AT4040’s low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects.
• Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics
• Externally polarized (DC bias) true condenser design
• Exceptionally low noise, wide dynamic range and high-SPL capability for greatest versatility
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Custom shock mount provides superior isolation
• Switchable 80 Hz hi-pass filter and 10 dB pad
• Specifications:
•
• ELEMENT Externally-polarized (DC bias) condenser
•
• POLAR PATTERN Cardioid
•
• FREQUENCY RESPONSE 20-20,000 Hz
•
• LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
•
• OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa
•
• IMPEDANCE 100 ohms
•
• MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
•
• NOISE 12 dB SPL
•
• DYNAMIC RANGE (typical) 133 dB, 1 kHz at Max SPL
•
• SIGNAL-TO-NOISE RATIO 82 dB, 1 kHz at 1 Pa
•
• PHANTOM POWER REQUIREMENTS 48V DC, 4.2 mA typical
•
• SWITCHES Flat, roll-off; 10 dB pad (nominal)
•
• WEIGHT 12.7 oz (360 g)
•
• DIMENSIONS 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
•
• OUTPUT CONNECTOR Integral 3-pin XLRM-type
•
• ACCESSORIES FURNISHED AT8449 shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
•
• AUDIO-TECHNICA CASE STYLE R1
Things You Will Get:
- Microphone
- Case
- Dust Cover
- Shockmount
| Series | 40 Series |
| Model | AT4040 |
AT4040 Cardioid Condenser Microphone
The manufacturer's warranty covers parts for one year and labor for one year from date of purchase. The warranty excludes damage from misuse, abuse, and contains other exclusions.
